Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

Seagate

Seagate Exos 7E8 ST1000NM0055 1 TB 7200 RPM SATA backup drive

SKU CH-B2GH-M9YGC

Enterprise 1 TB hard drive with 7200 RPM, 128 MB cache and SATA 6.0 Gb/s interface for high-capacity backup storage

  • 1 TB capacity for large backup sets
  • 7200 RPM spindle with 226 MB/s sustained transfer rate
  • 128 MB cache buffers burst workloads
  • 2 million-hour MTBF rating for enterprise reliability
  • 5-inch form factor fits standard drive bays

1 TB SATA enterprise drive

The Seagate Exos 7E8 ST1000NM0055 is a 3.5 inch hard drive built for enterprise capacity workloads. It delivers 1 TB of storage on a SATA 6.0 Gb/s interface with a 7200 RPM spindle and 128 MB cache.

Suited for bulk storage arrays

This drive fits servers and NAS units that need high-capacity SATA storage with a 2 million hour MTBF rating. It is not suited for systems that require a PCIe interface or a 2.5 inch form factor.

Max sustained transfer rate 226 MB/s

The maximum sustained transfer rate of 226 MB/s sets the throughput ceiling for sequential workloads. Verify that your controller and cabling support SATA 6.0 Gb/s to reach this figure.

Priekšrocības

  • 1 TB capacity for large backup sets
  • 7200 RPM spindle with 226 MB/s sustained transfer rate
  • 128 MB cache buffers burst workloads
  • 2 million-hour MTBF rating for enterprise reliability
  • 5-inch form factor fits standard drive bays

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

What does the SATA 6.0 Gb/s interface cap the sustained transfer rate at for this drive?

The SATA 6.0 Gb/s interface supports a maximum sustained transfer rate of 226 MB/s on this model.

What are the physical dimensions and weight for mounting this 3.5 inch drive?

It measures 101.85 x 147.00 x 26.10 mm and weighs 610.0 g, requiring a standard 3.5 inch bay.

How is the drive installed and which power connectors are required?

Mount in a 3.5 inch bay, connect a SATA data cable and a SATA power cable supplying both +12 V and +5 V rails.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.