Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver 3.5 inch hard drive with circuit board visible on underside

Seagate

Seagate Exos 7E8 ST6000NM021A 6TB 7200 RPM 256MB SATA 6.0Gb/s 3.5" internal hard drive 512e

SKU CH-Y1FB-XE47Q

6 TB enterprise SATA hard drive with 7200 RPM, 256 MB cache and 512e formatting for high-capacity storage arrays

  • InterfaceSATA 6.0Gb/s
  • Capacity6TB
  • RPM7200 RPM
  • Cache256MB
  • Average Latency4.16ms
  • UsageFor Enterprise Storage
  • Enterprise-grade reliability with 7200 RPM spindle speed
  • Fast data access via 256 MB cache and 4.16 ms latency
  • High-capacity 6 TB storage for demanding workloads
  • SATA 6.0 Gb/s interface enables broad system compatibility
  • Standard 3.5 inch form factor fits typical drive bays

Enterprise Capacity Drive

The Seagate Exos 7E8 ST6000NM021A is a 6TB 3.5-inch internal hard drive built for enterprise storage workloads. It operates at 7200 RPM with a 256MB cache and connects via a SATA 6.0Gb/s interface. This drive suits servers and storage arrays that require high-capacity, always-on reliability.

SATA 6.0Gb/s Interface

The SATA 6.0Gb/s interface is the single specification that determines compatibility with your host controller or backplane. The drive uses 512e sector formatting and presents a 4.16ms average latency. Verify that your system supports SATA 6.0Gb/s and 3.5-inch form factor bays before purchase.

Thermals And Power

The drive fits standard 3.5-inch bays with maximum dimensions of 147.00mm length, 101.85mm width and 26.10mm height. In normal enterprise operation the 7200 RPM spindle generates typical mechanical noise and heat output for this class. Ensure your chassis provides adequate airflow across the drive length for sustained operation.

Priekšrocības

  • Enterprise-grade reliability with 7200 RPM spindle speed
  • Fast data access via 256 MB cache and 4.16 ms latency
  • High-capacity 6 TB storage for demanding workloads
  • SATA 6.0 Gb/s interface enables broad system compatibility
  • Standard 3.5 inch form factor fits typical drive bays

Specifikācijas

BrandSeagate
SeriesExos 7E8
ModelST6000NM021A
InterfaceSATA 6.0Gb/s
Capacity6TB
RPM7200 RPM
Cache256MB
Average Latency4.16ms
UsageFor Enterprise Storage
Form Factor3.5"
Height (maximum)26.10mm
Width (maximum)101.85mm
Length (maximum)147.00mm

Jautājumi par šo preci

What does the 7200 RPM spindle speed mean for real-world throughput in a desktop?

The 7200 RPM rotation combined with a 256MB cache delivers sustained transfer rates suited to heavy sequential workloads such as video editing or large backups, while the 4.16ms average latency keeps random access responsive for multi-tasking.

How does the SATA 6.0Gb/s interface limit actual performance?

The SATA 6.0Gb/s link caps the theoretical maximum at 6.0 Gb/s, so the drive’s internal speed cannot exceed that ceiling; in practice you will see sequential reads and writes up to the drive’s own media rate, which stays within the SATA 6.0Gb/s envelope.

Will the 26.10mm height fit my standard 3.5-inch drive bay?

Yes, the 26.10mm height, 101.85mm width and 147.00mm length match the standard 3.5-inch form factor, so the drive mounts in any regular desktop bay or hot-swap tray using the usual four side screws.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.