Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver 3.5 inch bare SATA hard drive with printed label

Seagate

Seagate ST31500341AS 1.5TB 7200 RPM 32MB SATA 3.0Gb/s 3.5" internal hard drive

SKU CH-CB23-C8BE2 MPN ST31500341AS

1.5 TB 3.5" desktop drive with 7200 RPM, 32 MB cache and SATA 3.0 Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity1.5TB
  • RPM7200 RPM
  • Cache32MB
  • Average Latency4.16ms
  • 5 TB capacity for large desktop storage
  • 7200 RPM spindle speed for responsive data access
  • 32 MB cache to smooth burst workloads
  • SATA 3.0 Gb/s interface for broad motherboard compatibility
  • Second-generation perpendicular recording increases data density

Capacity and interface

This is a 1.5TB 3.5-inch desktop hard drive with a SATA 3.0Gb/s interface and 7200 RPM spindle speed. It uses second-generation perpendicular magnetic recording technology and includes a 32MB cache. The drive is supplied as a bare unit without retail packaging.

Suitable uses and limits

It suits buyers adding bulk storage to older desktops or replacing a failed drive in a system that only supports SATA 3.0Gb/s. It is not for builders who need a current manufacturer warranty, as the product is end-of-sale and carries only a one-year seller warranty. It is also not for users who require a drive with zero bad sectors, since up to 25 may be present.

Firmware revision requirement

The critical specification is the firmware revision: drives with part numbers ending in 138-300 or 138-366 must run revision SD17, SD15 or SD18 and can be upgraded to SD1A. Buyers should verify the revision on the label before installation to avoid known compatibility issues.

Priekšrocības

  • 5 TB capacity for large desktop storage
  • 7200 RPM spindle speed for responsive data access
  • 32 MB cache to smooth burst workloads
  • SATA 3.0 Gb/s interface for broad motherboard compatibility
  • Second-generation perpendicular recording increases data density

Specifikācijas

BrandSeagate
SeriesBarraCuda 7200.11
ModelST31500341AS
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity1.5TB
RPM7200 RPM
Cache32MB
Average Latency4.16ms
FeaturesImportant Warranty Information
This product is end-of-sale and no longer warranted by the manufacturer. Instead, warranties this product for one year from date of purchase. If you require warranty service after thirty days, please contact Customer Service, not the manufacturer.
UsageFor Daily Computing
Form Factor3.5"
Sūtījuma svars1.36 kg
Sūtījuma izmēri305 × 229 × 102 mm

Jautājumi par šo preci

How does the 1.5TB capacity hold up under continuous write workloads?

The drive uses second-generation perpendicular magnetic recording to reach 1.5TB with fewer moving parts, and the 32MB cache helps buffer sustained transfers over the SATA 3.0Gb/s link.

What temperature or noise level should I expect when the 7200 RPM spindle runs all day?

At 7200 RPM the drive produces typical desktop-class acoustic and thermal output; the SATA interface supports Native Command Queuing to reduce unnecessary head movement.

Does the SATA 3.0Gb/s connector work with my current motherboard and power supply?

Any motherboard with a standard SATA port and a power supply offering a 15-pin SATA power connector will support this 3.5-inch bare drive.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.