Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

Seasonic

Seasonic PRIME TX-1000 1000W 80+ Titanium power supply

SKU CH-BADE-30758

A 1000W ATX power supply with 80 PLUS Titanium efficiency, full modular cabling and a 135mm hybrid fan for quiet operation

  • TypeATX12V / EPS12V
  • Maximum Power1000 W
  • Fans135mm Fluid Dynamic Bearing Fan w/ Hybrid Fan Control
  • PFCActive
  • Main Connector24Pin
  • +12V RailsSingle
  • Tight load regulation under 0.5 % keeps voltage stable for demanding components
  • Full modular cabling lets you connect only what you need for cleaner airflow
  • 80 PLUS Titanium certification delivers 93.28 % average efficiency to cut wasted energy
  • Hybrid fan control with a 135 mm fluid dynamic bearing fan enables silent fanless operation at low loads
  • 1000 W on a single +12 V rail rated at 83 A powers high-end GPUs and CPUs

Seasonic PRIME TX-1000 1000W Titanium PSU

The Seasonic PRIME TX-1000 is a 1000 W ATX12V power supply certified to 80 PLUS Titanium with an average efficiency of 93.28 %. It uses a fully modular design and a single +12 V rail rated at 83 A. A 135 mm fluid dynamic bearing fan with hybrid control offers a selectable fanless mode. Premium Japanese capacitors and micro tolerance load regulation under 0.5 % support stable delivery for high-performance systems.

Suited for high-end builds needing 1000 W Titanium

This unit suits builders who want full modular cabling, a single 83 A rail and Cybenetics A- noise certification. It provides eight 6+2-pin PCIe connectors and fourteen SATA power connectors for multi-GPU or storage-heavy configurations. Buyers who need a lower maximum power rating or a non-modular design should look at something else. The 170 mm depth also requires a case that can accommodate that length.

Check case clearance and cable requirements before

Verify that your chassis allows a power supply depth of 170 mm and that the 24-pin ATX and EPS connectors match your motherboard. Ensure the eight 6+2-pin PCIe cables meet your graphics card needs and that the fourteen SATA connectors cover your drives. Confirm the 100-240 V input range matches your mains supply. The unit includes OPP, OVP, UVP, OCP, OTP and SCP protections.

Priekšrocības

  • Tight load regulation under 0.5 % keeps voltage stable for demanding components
  • Full modular cabling lets you connect only what you need for cleaner airflow
  • 80 PLUS Titanium certification delivers 93.28 % average efficiency to cut wasted energy
  • Hybrid fan control with a 135 mm fluid dynamic bearing fan enables silent fanless operation at low loads
  • 1000 W on a single +12 V rail rated at 83 A powers high-end GPUs and CPUs

Specifikācijas

BrandSeaSonic
TypeATX12V / EPS12V
Maximum Power1000 W
Fans135mm Fluid Dynamic Bearing Fan w/ Hybrid Fan Control
PFCActive
Main Connector24Pin
+12V RailsSingle
PCI-Express Connector8 x 6+2-Pin
SATA Power Connector14
Max PSU Length170 mm
ModularFull Modular
Efficiency93.28% (Avg.)
Energy-Efficient80 PLUS TITANIUM Certified
PSU Noise LevelCybenetics A-
Over Voltage ProtectionYes
Input Voltage100 - 240 V
Input Frequency Range50 - 60 Hz
MTBF150,000 hours MTBF @ 25 Degree C, excl. fan

Jautājumi par šo preci

Will the 170 mm length fit in a standard mid-tower case?

The unit is 170 mm long, which matches the typical maximum for most mid-tower cases. Check your case specification for the exact PSU clearance before ordering.

Can I run two high-end graphics cards with the eight 6+2-pin PCIe connectors?

Yes, the eight 6+2-pin connectors support up to four dual-connector cards or two cards that each need three connectors, all on the single +12 V rail rated at 83 A.

Does the fan stay off at low load and how do I choose the mode?

A rear switch selects S3FC for fanless operation at low load or S2FC for constant fan spin; the 135 mm fluid-dynamic-bearing fan runs only when needed in S3FC mode.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.