Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black mid-tower ATX case with full mesh front panel and tempered glass side panel

Silverstone Technology

Silverstone Technology FAR1B-G-V2 ATX Mid Tower PC Case

SKU CH-AHKR-AB9Y4 MPN FAR1B-G-V2

Mesh-front ATX mid-tower supporting 340 mm GPUs, 360 mm front radiators and 161 mm CPU coolers, with front USB 3.0, 2.0 and audio plus removable dust filters

  • TypeATX Mid Tower
  • Motherboard CompatibilityATX / Micro ATX / Mini ITX
  • Front Ports2 x USB 3.0, 1 x USB 2.0, 1 x Audio
  • Fan OptionsFront - 2 x 140mm / Front - 3 x 120mm / Rear - 1 x 120mm / T
  • Radiator OptionsFront - Up to 360mm / Rear - Up to 120mm / Top - Up to 240mm
  • Max GPU Length340 mm
  • Fully meshed front panel delivers high airflow intake
  • Front radiator support up to 360 mm enables liquid cooling capacity
  • Fits graphics cards up to 340 mm for high-end GPU compatibility
  • Top and bottom removable dust filters simplify maintenance cleaning
  • Front I/O includes two USB 3.0 ports, one USB 2.0 port and audio jack

ATX Mid Tower Chassis

The Silverstone FAR1B-G-V2 is an ATX mid tower case that accepts ATX, Micro ATX and Mini ITX motherboards. A fully meshed front panel provides a large surface area for air intake. Builders who need a compact cube or a slimline HTPC enclosure will not find that form factor here.

Sustained Thermal Behaviour

The mesh front feeds up to three 120 mm or two 140 mm fans while the top supports two 120 mm or two 140 mm fans and the rear takes one 120 mm fan. Radiator clearance reaches 360 mm at the front, 240 mm at the top and 120 mm at the rear. Systems that rely on passive cooling or a single low-profile fan will not move enough air through this layout.

Physical Installation Limits

Graphics cards up to 340 mm long fit inside the precisely designed interior. CPU coolers are limited to 161 mm in height and power supplies to 200 mm in length. Removable filters on the top and bottom panels simplify dust maintenance. Builders who require longer GPUs, taller coolers or deeper PSUs must choose a different chassis.

Priekšrocības

  • Fully meshed front panel delivers high airflow intake
  • Front radiator support up to 360 mm enables liquid cooling capacity
  • Fits graphics cards up to 340 mm for high-end GPU compatibility
  • Top and bottom removable dust filters simplify maintenance cleaning
  • Front I/O includes two USB 3.0 ports, one USB 2.0 port and audio jack

Specifikācijas

TypeATX Mid Tower
Motherboard CompatibilityATX / Micro ATX / Mini ITX
Front Ports2 x USB 3.0, 1 x USB 2.0, 1 x Audio
Fan OptionsFront - 2 x 140mm / Front - 3 x 120mm / Rear - 1 x 120mm / Top - 2 x 120mm / Top - 2 x 140mm
Radiator OptionsFront - Up to 360mm / Rear - Up to 120mm / Top - Up to 240mm
Max GPU Length340 mm
Max CPU Cooler Height161 mm
Max PSU Length200 mm
Sūtījuma svars2.27 kg
Sūtījuma izmēri127 × 127 × 127 mm

Jautājumi par šo preci

How much noise and heat should I expect when the front 140mm fans and top radiator run all day?

The fully meshed front panel gives a large intake area so the two 140mm front fans and a top 240mm radiator can move plenty of air without spinning at high speed, keeping noise and internal temperatures low during extended use.

Which motherboard, power supply and graphics card do I already need to fit this chassis?

The case accepts ATX, Micro ATX or Mini ITX boards, a power supply up to 200mm long, and a graphics card up to 340mm long, so any components within those limits will install without modification.

Will my existing 120mm rear fan and 161mm CPU cooler work alongside the new front 140mm mounts?

Yes, the rear 120mm mount and 161mm CPU cooler clearance remain unchanged, so your current rear fan and tower cooler can stay in place while you add up to two 140mm fans or a 360mm radiator at the front.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.