Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black mid tower case with tempered glass side panel and mesh front

Silverstone Technology

Silverstone Technology RNAB08KZ586CQ FARA R1 PRO ATX Mid Tower PC Case

SKU CH-JMB3-6ZQGR MPN RNAB08KZ586CQ

ATX mid-tower case with four 120mm ARGB fans, tempered glass side panel and mesh front for 322mm GPU clearance

  • TypeATX Mid Tower
  • ColorBlack
  • Case MaterialSteel / Plastic / Tempered Glass
  • With Power SupplyNo
  • Power Supply MountedBottom
  • Motherboard CompatibilityATX / Micro ATX / Mini ITX
  • Four pre-installed 120 mm ARGB fans with controller for vibrant lighting
  • Fully meshed front panel maximises airflow for cooler component temperatures
  • Spacious interior fits 322 mm graphics cards and 165 mm CPU coolers
  • Top and bottom dust filters remove easily for quick cleaning
  • Front I/O includes two USB 3.0, one USB 2.0 and audio jack

Mid-tower ATX case for ARGB builds

The SilverStone FARA R1 PRO is a black ATX mid-tower chassis built from steel, plastic and tempered glass. It targets builders who want a showcase window and pre-installed lighting without paying for a power supply. The mesh front panel and four included 120mm ARGB fans give immediate airflow and colour coordination out of the box.

Sustained-load airflow and radiator support

The shortened chassis and fully meshed front create a large intake area that keeps temperatures stable during long sessions. You can mount up to a 280mm radiator at the front, a 240mm unit at the top and a 120mm radiator at the rear. Seven expansion slots and a 322mm GPU clearance with front fans fitted leave room for high-end graphics cards.

Straightforward assembly with a few constraints

Removable dust filters on the top and bottom panels simplify cleaning after extended use. The 165mm CPU cooler limit and 160mm power-supply limit with the 3.5-inch drive cage installed mean tall coolers and long PSUs need verification before purchase. Front I/O provides two USB 3.0 ports, one USB 2.0 port and a single audio jack for everyday peripherals.

Priekšrocības

  • Four pre-installed 120 mm ARGB fans with controller for vibrant lighting
  • Fully meshed front panel maximises airflow for cooler component temperatures
  • Spacious interior fits 322 mm graphics cards and 165 mm CPU coolers
  • Top and bottom dust filters remove easily for quick cleaning
  • Front I/O includes two USB 3.0, one USB 2.0 and audio jack

Specifikācijas

BrandSilverStone
ModelFARA R1 PRO
Part NumberSST-FAR1B-PRO
TypeATX Mid Tower
ColorBlack
Case MaterialSteel / Plastic / Tempered Glass
With Power SupplyNo
Power Supply MountedBottom
Motherboard CompatibilityATX / Micro ATX / Mini ITX
Side Panelwith Side Window
Dust FiltersBottom / Top
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays4
Expansion Slots7
Front Ports2 x USB 3.0, 1 x USB 2.0, Audio x 1
Fan OptionsFront - 2 x 140mm / Front - 3 x 120mm / Rear - 1 x 120mm / Top - 2 x 120mm / Top - 2 x 140mm
Radiator OptionsFront - Up to 240mm / Front - Up to 280mm / Rear - Up to 120mm / Top - Up to 240mm
Max GPU Length322mm with front fan installed, width restriction - 170mm
Max CPU Cooler Height165 mm
Max PSU Length160mm with 3.5" drive cage installed
Dimensions17.56" x 8.15" x 15.35"
Weight11.84 lbs.
Sūtījuma svars6.35 kg
Sūtījuma izmēri516 × 498 × 300 mm

Jautājumi par šo preci

How much noise and heat do the four included 120mm ARGB fans produce when the system runs all day?

The four pre-installed 120mm ARGB fans move air through the fully meshed front panel; noise level varies with fan speed but the mesh design reduces restriction, helping keep temperatures lower at a given RPM.

What other components must I already own for this case to function as a complete build?

You need an ATX, Micro-ATX or Mini-ITX motherboard, a CPU cooler no taller than 165mm, a graphics card up to 322mm long and 170mm wide, a power supply up to 160mm long, plus storage drives for the one 3.5in and four 2.5in bays.

Will my older 280mm radiator and full-length GPU fit together in this chassis?

Yes, the front supports radiators up to 280mm and the GPU clearance remains 322mm with front fans installed, so a 280mm AIO and a long card can coexist.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.