Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

Simmtec, Inc

Simmtec, Inc 8GB (2x4GB) DDR3 1600MHz PC3-12800 CL11 240-pin 1.5V Desktop RAM

SKU CH-QVS6-X7E1F

Dual-channel 8 GB DDR3 kit running at 1600 MHz with CL11 timings and 1.5 V operation

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1600 (PC3 12800)
  • Dual-channel 8 GB kit boosts multitasking with two matched 4 GB modules
  • DDR3 1600 MHz PC3-12800 speed accelerates data transfer for responsive performance
  • CL11 latency at 1.5 V keeps timing tight while limiting power draw
  • 240-pin DIMM form factor fits standard desktop motherboard slots
  • 100 % tested modules reduce risk of crashes and motherboard damage

Kit Configuration

This Simmtec kit supplies eight gigabytes of desktop memory as two matched four-gigabyte modules. The DDR3 DIMMs run at 1600 MHz with a PC3-12800 rating and a CAS latency of 11. Each stick uses the standard 240-pin layout and operates at 1.5 volts.

Upgrade Scope

The pair replaces a single module or a lower-capacity set in boards that accept DDR3 240-pin memory. The jump is worthwhile when the system currently runs with less than eight gigabytes total or when mismatched sticks force the controller to run at a slower speed.

Build Fit

Installation requires a desktop motherboard with two free DDR3 DIMM slots and a memory controller that supports 1600 MHz operation. The matched pair enables dual-channel mode where the board allows it, freeing the remaining slots for future expansion without mixing module specifications.

Priekšrocības

  • Dual-channel 8 GB kit boosts multitasking with two matched 4 GB modules
  • DDR3 1600 MHz PC3-12800 speed accelerates data transfer for responsive performance
  • CL11 latency at 1.5 V keeps timing tight while limiting power draw
  • 240-pin DIMM form factor fits standard desktop motherboard slots
  • 100 % tested modules reduce risk of crashes and motherboard damage

Specifikācijas

Capacity8GB (2 x 4GB)
SpeedDDR3 1600 (PC3 12800)

Jautājumi par šo preci

Will the 240-pin DDR3 DIMMs fit my motherboard's memory slots?

These modules use the standard 240-pin DDR3 form factor, so they install in any desktop board with DDR3 slots.

Do I need to enable XMP in BIOS to reach 1600 MHz, or is it plug-and-play?

The kit runs at 1600 MHz with CL11 timings at the standard 1.5 V; most boards will configure this automatically without manual BIOS changes.

How do I know if a module fails later, and can I replace just one stick?

Each 4 GB stick is tested before shipping; if errors appear, run a memory diagnostic to isolate the faulty module and replace only that DIMM.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.