SK hynix
SK hynix HMA82GU7AFR8N-UH 16GB 2Rx8 DDR4-2400 CL17 ECC Unbuffered Server Memory
16GB DDR4-2400 ECC unbuffered DIMM with 2Rx8 organisation and CL17 latency for server workloads
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Voltage1.20V
- ECCECC Chipkill
- ECC Chipkill protection guards data integrity
- 2400 MHz DDR4 speed feeds server workloads
- 16 GB capacity expands memory headroom
- 20 V operation reduces power draw
- 288-pin unbuffered DIMM fits standard server slots
Server memory module
This is a 16 GB DDR4 UDIMM rated at 2400 MT/s with CL17 latency and 1.20 V operation. It carries ECC Chipkill protection in an unbuffered, 2Rx8 configuration on a 288-pin PCB. The stick is sold new and individually tested.
Builders needing ECC on consumer platforms
The module suits workstation or entry-level server boards that accept unbuffered ECC DDR4. It will not work in systems that require registered or load-reduced DIMMs, nor in laptops or non-ECC consumer desktops that lack ECC support in the memory controller.
Capacity and rank
The single 16 GB, dual-rank stick populates one slot and runs at DDR4-2400 CL17; verify that your motherboard supports 2Rx8 unbuffered ECC at this density before purchase.
Priekšrocības
- ECC Chipkill protection guards data integrity
- 2400 MHz DDR4 speed feeds server workloads
- 16 GB capacity expands memory headroom
- 20 V operation reduces power draw
- 288-pin unbuffered DIMM fits standard server slots
Specifikācijas
| Brand | Hynix |
|---|---|
| Model | HMA82GU7AFR8N-UH |
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | ECC Chipkill |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
Jautājumi par šo preci
How can I confirm the 16GB DDR4-2400 CL17 ECC unbuffered module is running at its rated speed and timings after installation?
Enter the system BIOS or UEFI and verify the memory frequency shows 2400 MHz, CAS latency reads 17, and ECC is reported as active; CPU-Z or dmidecode will also display 1.20 V and 2Rx8 organisation.
What exactly ships in the box and do I need any extra cables, brackets or software for this 288-pin ECC DIMM?
The package contains one 16 GB 2Rx8 PC4-19200E DDR4-2400 288-pin ECC unbuffered DIMM; no cables, brackets, drivers or additional hardware are required for installation.
Which version should I choose if my server manual specifies PC4-19200E DDR4-2400 ECC unbuffered memory in a 2Rx8 configuration?
This exact module matches that specification — 16 GB, DDR4-2400, CL17, 1.20 V, 2Rx8, ECC Chipkill, unbuffered, 288-pin — so select this part number.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
YourBestChoice
YourBestChoice 34mm ExpressCard to 2 Port USB 3.0 Adapter NEC Chip
10,99 $
0.00014106BTC
Krājumā
SAMSUNG
SAMSUNG M471B5173QH0-YK0 4GB DDR3L PC3-12800 CL11 1.35V 204P SODIMM memory upgrade
14,99 $
0.00019241BTC
Krājumā