SK hynix
SK hynix HMT42GR7AFR4C-RD 16GB DDR3 1866 ECC Registered CL13 1.50V 2Rx4 server RAM
16 GB DDR3 1866 ECC registered server memory with CL13 latency and 1.50 V operation
- Capacity16GB
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1866 (PC3 14900)
- CAS LatencyCL13
- Voltage1.50V
- ECCYes
- 16 GB capacity for high-density server workloads
- DDR3 1866 speed rated at PC3 14900 bandwidth
- ECC registered design detects and corrects memory errors
- CL13 latency at 1.50 V for stable operation
- 2Rx4 organisation on 240-pin DIMM form factor
16 GB DDR3-1866 registered ECC module
This SK hynix HMT42GR7AFR4C-RD is a 16 GB DDR3 SDRAM DIMM rated for 1866 MT/s (PC3-14900) with CL13 latency and 1.50 V operation. It uses 240-pin registered ECC construction in a 2Rx4 organisation, built for server and workstation platforms that require registered memory with error correction.
Suited for servers needing registered ECC DDR3
The module fits systems designed for registered DDR3 DIMMs with ECC support at 1866 MT/s. Buyers whose platforms only accept unbuffered non-ECC memory, or that require a different DDR generation or a lower voltage, will need a different part.
Registered ECC DDR3 at 1866 MT/s decides fit
Registered ECC signalling at DDR3-1866 is the single specification that determines compatibility; the motherboard and processor must both support registered DDR3 DIMMs with error correction at this speed and voltage.
Priekšrocības
- 16 GB capacity for high-density server workloads
- DDR3 1866 speed rated at PC3 14900 bandwidth
- ECC registered design detects and corrects memory errors
- CL13 latency at 1.50 V for stable operation
- 2Rx4 organisation on 240-pin DIMM form factor
Specifikācijas
| Brand | Hynix |
|---|---|
| Model | HMT42GR7AFR4C-RD |
| Capacity | 16GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
Jautājumi par šo preci
What CAS latency does the module run at under sustained load?
The module operates at CL13 CAS latency during continuous operation.
How much power does each 16GB stick draw at 1.50V when running all day?
At the rated 1.50V the DDR3 registered DIMM draws only the power required for ECC and register logic, keeping heat output low in a 240-pin slot.
Which motherboard feature must already be present for this 2Rx4 registered ECC DDR3 memory to function?
The system must provide a DDR3 registered DIMM slot with ECC support; standard unbuffered consumer boards will not accept this module.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 $
0.00134613BTC
Krājumā
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 $
0.00010244BTC
Krājumā