NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
SK hynix
4GB DDR2 800 desktop memory module with CL6 latency, 1.50V operation and 240-pin DIMM form factor
This module delivers 4 GB of DDR2 memory at 800 MHz with a CL6 latency rating. It uses the standard 240-pin DIMM form factor and operates at 1.50 V. The unbuffered, non-ECC design suits typical desktop motherboards that accept PC2-6400 memory.
DDR2 memory runs passively without fans, so the module adds no audible noise to the system. Power consumption is limited to the 1.50 V supply rail and scales with the 800 MHz data rate. Under normal desktop workloads the thermal output remains low and is handled by ordinary case airflow.
The product ships as a single 4 GB stick with no additional brackets, cables or software utilities. Installing it simply increases the system memory capacity by 4 GB on a compatible DDR2 platform. No extra configuration or driver installation is required beyond standard BIOS detection.
| Brand | Hynix |
|---|---|
| Series | Desktop Memory |
| Model | HYMP151F72CPD43-S6 |
| Capacity | 4GB |
| Speed | DDR2 800 (PC2 6400) |
| CAS Latency | CL6 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
Align the single notch on the module with the key in the 240-pin slot, press down evenly until both side clips click shut, and verify the notch is fully seated — the most common mistake is stopping before the clips engage.
No scheduled maintenance is required; keep the contacts clean and ensure the motherboard supplies a steady 1.50 V — if errors appear, replace the module rather than attempting repair.
The CAS latency of CL6 at 800 MHz sets the timing ceiling; prolonged heavy workloads hit this latency bound before bandwidth or voltage limits become the bottleneck.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?