Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green PCIe card with eSATA, SATA and IDE connectors

SMUGDESK

SMUGDESK PCIe to eSATA + SATA + IDE RAID Card

SKU CH-0V5Q-FP1NB

Adds eSATA, SATA and IDE ports via PCIe with RAID support for legacy and modern drives

  • Connect legacy IDE drives via PCIe expansion
  • Add internal SATA and external eSATA ports simultaneously
  • Built-in RAID array controller protects data redundancy
  • Boot from optical drives and hard disks directly
  • Plug-and-play Windows compatibility suits industrial and retro PCs

Multi-interface expansion

This PCIe card adds eSATA, one internal SATA port and an IDE connector to a desktop system. It is intended for users who need to connect legacy IDE drives, internal SATA storage and external eSATA devices simultaneously. The board also supports booting from optical drives and hard disks, making it suitable for system installation on older hardware. Industrial PC builders and retro-computing enthusiasts will find the combined interfaces convenient for storage expansion.

Interface speed and port limits

The eSATA and internal SATA ports operate at the SATA revision supported by the host platform, while the IDE channel follows legacy parallel ATA timing. Only one internal SATA device can be attached directly to the card, so additional SATA drives require a separate controller or motherboard ports. External eSATA cables are limited to the standard two-metre length, and the single IDE connector supports up to two devices in a master/slave arrangement. Bandwidth is shared across all active ports through the PCIe lane allocation of the slot used.

RAID capability

An on-board RAID controller provides array functionality across the connected drives, enabling redundancy or performance configurations without a separate HBA. This hardware RAID support is the decisive specification for buyers who need data protection or striping across mixed IDE, SATA and eSATA devices. Systems without a requirement for hardware RAID arrays will not benefit from this feature.

Priekšrocības

  • Connect legacy IDE drives via PCIe expansion
  • Add internal SATA and external eSATA ports simultaneously
  • Built-in RAID array controller protects data redundancy
  • Boot from optical drives and hard disks directly
  • Plug-and-play Windows compatibility suits industrial and retro PCs

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

Should I pick this card or a simpler SATA-only adapter for my build?

Choose this card if you need eSATA, internal SATA and legacy IDE on one PCIe slot, plus RAID support; a SATA-only adapter cannot connect IDE or external eSATA drives.

What does the built-in RAID function actually do for my drives?

The on-board RAID controller lets you combine the attached SATA and IDE drives into arrays for redundancy or speed, so a single drive failure will not lose data.

Which PCIe lane width does this card need and what throughput ceiling does that impose?

The card fits any PCIe x1 or larger slot; the lane width caps total bandwidth to that slot's generation limit, which then governs maximum eSATA and SATA transfer rates.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.