Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black aluminum enclosure converts a 2.5" SATA drive to 3.5" form factor

STARTECH

STARTECH 25SAT35HDD 2.5" to 3.5" SATA HDD accessory

SKU CH-SZJJ-JC0GZ MPN 25SAT35HDD

Mounts a 2.5″ SATA drive in a 3.5″ bay with tool-less installation and standard mounting points

  • ColorBlack
  • SpecificationsDrive Connectors: 1 x SATA Data & Power Combo (7+15 pin) Hos
  • FeaturesSupports 2.5" SSD/HDD up to 12.5mm in height Standard 3.5" H
  • Package Contents1 x 2.5" to 3.5" SATA HDD/SSD Enclosure 1 x Screw kit 1 x In

Option 3.5in SATA Enclosure - 2.5 in SATA Drive

  • 3.5in SATA Enclosure - 2.5 in SATA Drive
  • 3.5in SATA Enclosure - 2.5 in SATA/SAS Drive

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • Turn a 2.5" SATA drive into a 3.5" form factor using the integrated SATA data and power connectors
  • Fit 2.5" SSDs or HDDs up to 12.5mm tall inside the aluminum enclosure for secure mounting
  • Install without tools thanks to the slide-in tray and included screw kit for the 3.5" bay
  • Mount in any standard 3.5" chassis, backplane or docking station using the industry-standard screw holes
  • Support SATA I, II and III speeds up to 6.0 Gbps through the direct pass-through connector design

2.5-inch to 3.5-inch SATA drive adapter

This aluminum enclosure converts a 2.5-inch SATA SSD or hard drive into a standard 3.5-inch form factor. It fits drives up to 12.5mm in height and uses the same mounting points as a native 3.5-inch drive. The adapter is designed for desktop chassis, backplanes or docking stations that only accept 3.5-inch bays.

Tool-less installation

The enclosure secures the smaller drive without tools and presents a single SATA data and power combo connector on the rear. Standard 3.5-inch screw holes align with typical drive cages and trays, so the converted drive installs like any other 3.5-inch unit. Black aluminum construction aids heat dissipation during operation.

Upgrades 2.5-inch SATA drives into 3.5-inch bays

This adapter replaces the need for a dedicated 3.5-inch drive when only a 2.5-inch SATA SSD or HDD is available. The jump is worth it when a system or enclosure lacks 2.5-inch mounting options but has free 3.5-inch slots. It does not add performance or change the SATA revision supported by the drive itself.

Priekšrocības

  • Turn a 2.5" SATA drive into a 3.5" form factor using the integrated SATA data and power connectors
  • Fit 2.5" SSDs or HDDs up to 12.5mm tall inside the aluminum enclosure for secure mounting
  • Install without tools thanks to the slide-in tray and included screw kit for the 3.5" bay
  • Mount in any standard 3.5" chassis, backplane or docking station using the industry-standard screw holes
  • Support SATA I, II and III speeds up to 6.0 Gbps through the direct pass-through connector design

Specifikācijas

BrandStarTech.com
Model25SAT35HDD
ColorBlack
SpecificationsDrive Connectors: 1 x SATA Data & Power Combo (7+15 pin)
Host Connectors: 1 x SATA Data & Power Combo (7+15 pin)
Dimensions: 1.40" x 4.00" x 5.70"
Weight: 9.20 oz.
FeaturesSupports 2.5" SSD/HDD up to 12.5mm in height
Standard 3.5" HDD mounting points
Support for SATA revision I/II/III (1.5/3.0/6.0 Gbps)
Tool-less installation
Package Contents1 x 2.5" to 3.5" SATA HDD/SSD Enclosure
1 x Screw kit
1 x Install Guide
Sūtījuma svars0.27 kg
Sūtījuma izmēri164 × 112 × 37 mm

Jautājumi par šo preci

What SATA revision does the 25SAT35HDD support and what is the maximum data rate?

The adapter supports SATA revision I, II and III, providing a maximum data rate of 6.0 Gbps.

What are the mounting dimensions and screw pattern of the 25SAT35HDD?

The enclosure uses standard 3.5" HDD mounting points and measures 1.40" x 4.00" x 5.70".

How do you install a drive in the 25SAT35HDD and what is the common mistake?

The tool-less design lets you slide a 2.5" SATA drive up to 12.5mm in height into the tray and close the latch; the step often missed is ensuring the latch clicks fully shut to secure the SATA connector.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.