Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black IDE 40-pin to SATA adapter converter

STARTECH

STARTECH IDE2SAT2 IDE to SATA hard drive adapter 40-Pin PATA to 2.5

SKU CH-DVTK-GJTC7 MPN IDE2SAT2

Connects a 2.5" SATA hard drive, SSD or optical drive to a 40-pin IDE motherboard

  • ColorBlack
  • Cable LengthNo
  • Changer TypeIDE to SATA with ODD Support
  • Connector AIDE 40-Pin
  • Connector BSATA
  • Weight0.2
  • Connect SATA drives to legacy IDE motherboards using 40-pin PATA interface
  • Supports 2.5" SATA SSDs HDDs and optical drives for versatile upgrades
  • Lightweight 0.2 kg adapter adds minimal bulk inside tight cases
  • Simple plug-and-play converter requires no external power or drivers
  • Black IDE-to-SATA bridge extends life of older systems with modern storage

IDE 40-Pin to SATA adapter

The StarTech IDE2SAT2 converts a 40-pin IDE interface into a standard SATA connection. It enables SATA hard drives, solid-state drives or optical drives to operate from a legacy IDE motherboard header. The compact black adapter weighs 0.2 kg and requires no separate cable.

Builders upgrading legacy systems

This adapter suits anyone connecting a 2.5 inch SATA HDD, SSD or Blu-ray/DVD/CD-ROM drive to an older IDE-only board. It will not help users who need to attach 3.5 inch SATA drives or who require a SATA-to-IDE direction instead.

Capacity and headroom

The converter handles any SATA storage device that fits the 2.5 inch form factor, including modern SSDs and optical drives. It runs out when the target drive exceeds the 2.5 inch size or when the host system lacks a 40-pin IDE header entirely.

Priekšrocības

  • Connect SATA drives to legacy IDE motherboards using 40-pin PATA interface
  • Supports 2.5" SATA SSDs HDDs and optical drives for versatile upgrades
  • Lightweight 0.2 kg adapter adds minimal bulk inside tight cases
  • Simple plug-and-play converter requires no external power or drivers
  • Black IDE-to-SATA bridge extends life of older systems with modern storage

Specifikācijas

BrandStarTech.com
ModelIDE2SAT2
ColorBlack
Cable LengthNo
Changer TypeIDE to SATA with ODD Support
Connector AIDE 40-Pin
Connector BSATA
Weight0.2
Sūtījuma svars0.09 kg
Sūtījuma izmēri173 × 140 × 33 mm

Jautājumi par šo preci

What motherboard connector must I already have to use the IDE2SAT2?

You need a spare 40-pin IDE header on the motherboard to plug the adapter into.

Will the adapter work with a legacy optical drive I want to keep?

Yes, it supports Blu-ray, DVD and CD-ROM drives as well as 2.5" SATA hard drives and SSDs.

How can I confirm the adapter is functioning after I connect a drive?

The attached SATA drive should appear in the system BIOS and be recognised by the operating system as a standard storage device.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.