Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver rectangular server power supply unit with handle and ventilation grille

Supermicro

Supermicro 2 kW Redundant Server Power Supply 80 Plus Titanium 12 V 166.70 A

SKU CH-R4R0-3X056

Redundant 2 kW server power supply delivering 12 V at 166.70 A with 96 % efficiency and 80 Plus Titanium certification

  • Input Voltage120 V AC 230 V AC
  • Efficiency96%
  • FeaturesRoHS REACH 80 Plus Titanium
  • Redundant design keeps servers running during a module failure
  • 96 % efficiency at 80 Plus Titanium cuts energy waste
  • Delivers 166.70 A on a single 12 V rail for high-density loads
  • Accepts 120 V and 230 V AC for worldwide deployment
  • Compact 2.9" × 1.6" × 10.4" rack-mount form factor fits dense chassis

2 kW Redundant Server Power Supply

This 2 kW redundant power supply delivers 12 V DC at up to 166.70 A for Supermicro SuperStorage 6048R-E1CR60L servers. It accepts 120 V AC or 230 V AC input and achieves 96 % efficiency with 80 Plus Titanium certification. The rack-mountable unit measures 2.9 in high, 1.6 in wide and 10.4 in deep. It is suited for data-centre operators who need hot-swap redundancy in a single-slot form factor.

Replaces a failed or lower-efficiency module

Swapping in this unit restores N+1 redundancy when an existing supply fails or when upgrading from a lower-efficiency model to reduce operating cost. The jump is worth it when the server requires 12 V output at 166.70 A and the chassis accepts the 2.9 in height and 10.4 in depth dimensions. It also supplies a 12 V DC auxiliary rail at 2.10 A for management functions.

Verify chassis slot dimensions and AC source

Confirm the server bay accommodates a module 2.9 in high by 1.6 in wide by 10.4 in deep and that the rack power distribution provides either 120 V AC or 230 V AC. Ensure the backplane supports hot-swap insertion and that the system firmware recognises the redundant supply for monitoring. RoHS and REACH compliance are certified.

Priekšrocības

  • Redundant design keeps servers running during a module failure
  • 96 % efficiency at 80 Plus Titanium cuts energy waste
  • Delivers 166.70 A on a single 12 V rail for high-density loads
  • Accepts 120 V and 230 V AC for worldwide deployment
  • Compact 2.9" × 1.6" × 10.4" rack-mount form factor fits dense chassis

Specifikācijas

BrandSuperMicro
Series80 Plus
Input Voltage120 V AC 230 V AC
Efficiency96%
FeaturesRoHS REACH 80 Plus Titanium

Jautājumi par šo preci

Will the 2.9" height and 1.6" width fit my Supermicro SuperStorage 6048R-E1CR60L server?

The unit is 2.9 inches tall and 1.6 inches wide, matching the redundant power supply bay in the SuperStorage 6048R-E1CR60L chassis.

How do I install the module and what step is often missed?

Slide the supply into the hot-swap bay until the latch clicks, then verify the green AC-OK and DC-OK LEDs are both lit before assuming it is online.

When will the internal fan or electrolytic capacitors need replacement?

The 96% efficient 80 Plus Titanium design runs cooler, extending fan and capacitor life; plan inspection after three to five years of continuous 12 V 166.70 A load.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.