Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black standalone SATA duplicator with LCD screen and dual hot-swap slots for 2.5 and 3.5 drives

Systor

Systor SYS301DP 1:1 SATA Hard Drive Duplicator & Sanitizer

SKU CH-CRPY-6M03D

Standalone SATA duplicator copies or sanitises one 2.5 or 3.5 drive to another at 18 GB/min with DoD 5220.22-M erase

  • TypeHard Drive Duplicator
  • Target1 to 1
  • Buffer Memory128 MB
  • Data Transfer Rate18.0GB/min (300MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 01

DATA TRANSFER RATE 18.0GB/min [300MB/sec]

  • 1:1 SATA duplication up to 300 MB/s
  • 128 MB buffer supports 18 GB/min throughput
  • Standalone LCD operation needs no host computer
  • DoD 5220.22-M sanitisation erases drives securely
  • Slot-load bays accept 2.5" and 3.5" drives directly

1:1 SATA Duplicator & Sanitizer

The Systor SYS301DP is a standalone 1:1 SATA hard-drive duplicator and sanitizer that copies or erases one 2.5 or 3.5-inch drive at up to 18.0 GB per minute. It operates without a host computer and uses a 128 MB buffer to sustain 300 MB/sec transfer rates. An LCD screen reports progress and status for each operation.

IT specialists sanitising single drives

Technicians who need to clone or wipe individual SATA hard drives or solid-state drives will find the dual hot-swap bays and DoD 5220.22-M compliant erase modes fit a standard bench workflow. The unit only accepts SATA drives and processes one target at a time, so environments that require multi-target duplication or support for other interfaces should look elsewhere.

18.0 GB/min copy throughput

The sustained 18.0 GB per minute (300 MB/sec) data rate is the key figure that determines whether the duplicator can meet a given production window. With a single target bay and SATA-only connectivity, this throughput defines the maximum volume the device can handle in a shift.

Priekšrocības

  • 1:1 SATA duplication up to 300 MB/s
  • 128 MB buffer supports 18 GB/min throughput
  • Standalone LCD operation needs no host computer
  • DoD 5220.22-M sanitisation erases drives securely
  • Slot-load bays accept 2.5" and 3.5" drives directly

Specifikācijas

BrandSystor
ModelSYS301DP
TypeHard Drive Duplicator
Target1 to 1
Buffer Memory128 MB
Data Transfer Rate18.0GB/min (300MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 80 W
Package Contentssee pictures for details

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What size drives fit the SYS301DP duplicator bays without adapters?

The duplicator accepts both 3.5" and 2.5" SATA hard drives or solid-state drives directly in its slots, no adapters required.

How do I start a copy or erase job on the standalone SYS301DP, and what setting is often missed?

Insert the source and target drives, use the LCD menu to choose System-and-Files or Whole-HDD mode, then press Start; the step users miss is selecting the correct copy mode before beginning.

Which erase standard does the SYS301DP support for sanitisation, and how is it invoked?

The unit is DoD 5220.22-M compliant; select the multi-pass erase function from the LCD menu to run the sanctioned sanitisation process.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.