Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Ten spools of black 2.85mm nylon filament in cardboard box

Taulman 3D

Taulman 3D Nylon Bridge Filament 2.85mm 1lb Black 10 pack 3d printers accessory

SKU CH-A8WK-61A7E

Ten 2.85 mm spools of black nylon filament rated at 4800 PSI tensile strength and 248 % elongation for strong, low-warp prints

  • ColorBlack
  • TypeFilament
  • Less warping than standard nylon for easier printing
  • 4800 PSI tensile strength for durable functional parts
  • 248% elongation absorbs impact without snapping
  • Prints directly on glass with PVA glue adhesion
  • Ten spools included for high-volume production

Nylon Bridge 10-Spool Pack

This Taulman 3D filament bundle delivers ten 1 lb spools of 2.85 mm Nylon Bridge in black. It targets makers who need strong, functional parts and want a nylon that prints more reliably than standard grades. The material bridges the strength of Nylon 645 with easier handling.

Warping And Adhesion Behaviour

Nylon Bridge maintains a tensile strength of 4800 PSI and an elongation at break of 248% during long prints. The formulation reduces water uptake and shrinkage, so layers stay bonded and corners resist curling over many hours. Stronger bed adhesion keeps edges flat without the aggressive warping common in unmodified nylons.

Printer Compatibility Check

Confirm that your printer accepts 2.85 mm filament and can reach the nozzle temperatures required for nylon. A heated bed and the ability to apply PVA glue to a glass surface are needed for the stated adhesion benefits. The spool dimensions and feeder clearance must suit ten 1 lb rolls.

Priekšrocības

  • Less warping than standard nylon for easier printing
  • 4800 PSI tensile strength for durable functional parts
  • 248% elongation absorbs impact without snapping
  • Prints directly on glass with PVA glue adhesion
  • Ten spools included for high-volume production

Specifikācijas

Brandtaulman3d
ColorBlack
TypeFilament

Jautājumi par šo preci

How much heat does the 2.85 mm Nylon Bridge filament generate during a long print?

The filament itself produces no heat; heat comes from the hot-end and heated bed you set for nylon temperatures.

What printer hardware is required to use the 2.85 mm diameter spools?

A 3D printer that accepts 2.85 mm filament, a heated bed, and PVA glue on glass for bed adhesion.

Will the 4800 PSI tensile strength parts bond well to older PLA or ABS prints?

Nylon Bridge does not chemically fuse to PLA or ABS; mechanical interlocking or adhesives are needed for mixed-material assemblies.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.