Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Three square green 120mm fans with transparent blades and black frames, magnetic connectors visible on sides

Thermaltake

Thermaltake CT120 EX ARGB Reverse 120mm Case Fan 3-Pack Matcha Green CL-F198-PL12MG-A

SKU CH-SMDZ-ZQJ4F MPN CL-F198-PL12MG-A

A three-pack of 120 mm reversed-blade fans with magnetic daisy-chain mounting, 9 addressable LEDs and 65.82 CFM airflow at 31.2 dBA

  • TypeCase Fan
  • Fan Size120mm
  • ColorGreen
  • Reversed blades show full ARGB lighting from either airflow direction
  • Magnetic MagForce 2.0 links fans together with larger contact pads for quick assembly
  • 82 CFM airflow and 1.87 mm-H2O pressure at 31.2 dBA for strong cooling with low noise
  • 9 addressable LEDs sync with major motherboard software across 16.8 million colours
  • Solid frame plus anti-vibration rubber pads keep the fan stable and quiet

Matcha Green 120 mm ARGB fan trio

This three-pack supplies three 120 mm case fans finished in matcha green with reversed blades so the ARGB lighting stays visible whichever way air moves. Each fan spins up to 2000 RPM, delivering 65.82 CFM airflow and 1.87 mm-H2O static pressure at a rated 31.2 dBA. Nine addressable LEDs per fan produce 16.8 million colours that synchronise through a 5 V motherboard header.

Builders who want coordinated lighting

The MagForce 2.0 magnetic connectors let the three fans snap together and draw power from a single daisy-chained cable, reducing clutter inside the case. The reversed blade layout suits radiator mounts where the illuminated side faces the interior. Buyers who need PWM fans without addressable RGB or who prefer a traditional blade orientation should consider other models.

Magnetic daisy-chain and 5 V ARGB sync

MagForce 2.0 uses larger contact pads so the fans lock together firmly and share a single 5 V ARGB signal from the motherboard. Compatible software from ASUS, MSI, Gigabyte, Biostar and ASRock controls the nine LEDs per fan for per-LED effects. Anti-vibration rubber pads on the frame corners dampen resonance at higher speeds.

Priekšrocības

  • Reversed blades show full ARGB lighting from either airflow direction
  • Magnetic MagForce 2.0 links fans together with larger contact pads for quick assembly
  • 82 CFM airflow and 1.87 mm-H2O pressure at 31.2 dBA for strong cooling with low noise
  • 9 addressable LEDs sync with major motherboard software across 16.8 million colours
  • Solid frame plus anti-vibration rubber pads keep the fan stable and quiet

Specifikācijas

TypeCase Fan
Fan Size120mm
ColorGreen
Sūtījuma svars0.82 kg
Sūtījuma izmēri152 × 135 × 89 mm

Jautājumi par šo preci

Does my motherboard need a 5 V ARGB header to light up the 9 addressable LEDs on these fans?

Yes, the fans use a 5 V ARGB connector and rely on motherboard sync software from ASUS, MSI, GIGABYTE, BIOSTAR or ASROCK for colour control.

Will the MagForce 2.0 magnetic links attach to my existing CT-series fans that use the original MagForce?

The new MagForce 2.0 pads are larger and redesigned, so they are not backward-compatible with the first-generation magnetic connectors.

How can I confirm the fans are running at their rated 2000 RPM after installation?

Check the fan-speed readout in your motherboard BIOS or monitoring software; it should report close to 2000 RPM under full load.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.