Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
M.2 2280 SSD with black heatsink and 30mm fan

Titanium Micro

Titanium Micro TH7175 1TB PCIe 4.0 NVME M.2 2280 internal SSD with Nitro Pro cooler 30mm fan

SKU CH-8YK4-EB8NR

1TB PCIe 4.0 NVME M.2 2280 SSD with Nitro Pro cooler and 30mm fan, up to 7175 MB/s read and 6800 MB/s write

  • Used ForConsumer
  • Memory ComponentsQLC
  • InterfacePCI-Express 4.0 x4

Options TH7175-1TB w/ Heatsink

  • Up to 80% faster boot times versus traditional hard drives
  • PCIe 4.0 x4 interface delivers up to 7175 MB/s sequential read
  • Nitro Pro cooler with 30mm fan maintains performance under load
  • QLC memory with no moving parts resists vibration and drops
  • Compatible with PC, Mac, Linux, PlayStation and Xbox

Built for consumer workloads

The Titanium Micro TH7175 is a 1TB PCIe 4.0 NVME M.2 2280 internal SSD designed for consumer use. QLC memory components deliver sequential reads up to 7175 MB/s and writes up to 6800 MB/s. Compatibility spans PC, Mac, Linux, PlayStation and Xbox platforms.

Active cooling keeps temperatures steady

A Nitro Pro heatsink with an integrated 30mm fan mounts directly on the drive to move heat away during sustained transfers. The active cooler runs quietly under normal workloads while drawing minimal power from the motherboard header. Thermal throttling is reduced without adding liquid loops or bulky radiators.

Low-profile cooler fits standard slots

The 30mm fan assembly sits close to the PCB so the drive still fits typical M.2 2280 slots on desktop boards and consoles. No extra brackets or cables are required beyond the standard motherboard fan header. QLC endurance suits everyday gaming and productivity, but buyers who need higher write endurance for heavy content creation should consider alternatives.

Priekšrocības

  • Up to 80% faster boot times versus traditional hard drives
  • PCIe 4.0 x4 interface delivers up to 7175 MB/s sequential read
  • Nitro Pro cooler with 30mm fan maintains performance under load
  • QLC memory with no moving parts resists vibration and drops
  • Compatible with PC, Mac, Linux, PlayStation and Xbox

Specifikācijas

Used ForConsumer
Memory ComponentsQLC
InterfacePCI-Express 4.0 x4

Citas šī modeļa versijas

Vēl 3 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the 30 mm fan cooler fit inside my motherboard's M.2 slot area?

The Nitro Pro cooler is built to the 2280 form factor, so it occupies the standard M.2 footprint; verify your board's clearance around the slot before installing.

Can I use this drive in a PlayStation 5 without removing the cooler?

The supplier lists PlayStation compatibility, but the 30 mm fan adds height; check the console's M.2 bay dimensions to confirm the cooler fits.

What sustained write speed should I expect from the 1 TB model during large file transfers?

The 1 TB drive is rated for a maximum sequential write of 6800 MB/s over the PCIe 4.0 x4 interface.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.