SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Toshiba
12TB 7200 RPM SAS 12Gb/s 3.5-inch drive with 512MB cache and helium-sealed 9-disk CMR design for cloud-scale storage infrastructure
The Toshiba MG09SCA12TE is a 12TB 3.5-inch internal hard drive built for cloud-scale servers and software-defined data centres. It runs at 7200 RPM with a 512MB cache and uses a SAS 12Gb/s interface. The helium-sealed, 9-disk design supports capacity-optimised rack-scale systems and tiered storage infrastructure.
Conventional Magnetic Recording and Flux Control Microwave-assisted Magnetic Recording keep the drive compatible with existing arrays while raising areal density. The industry-standard 26.1mm height fits regular 3.5-inch bays and the SAS connector provides dual-port redundancy for continuous operation. A lower operational power profile improves watts-per-terabyte efficiency in large deployments.
Replacing 6TB or 8TB drives with this 12TB model cuts the number of spindles needed for a given raw capacity, reducing rack space and cabling. The jump is worth it when backup windows shrink or when object-based archives grow past the density limits of earlier helium or air-filled drives.
| Brand | TOSHIBA |
|---|---|
| Series | MG09 Series |
| Model | MG09SCA12TE |
| Interface | SAS 12Gb/s |
| Capacity | 12TB |
| RPM | 7200 RPM |
| Cache | 512MB |
| Features | Applications Cloud-scale Sever and Storage Infrastructure Software-defined data center infrastructure File- and Object-based storage infrastructure Tiered Storage Infrastructure Solutions Workloads and Use-Cases that Benefit from High Capacity per Spindle disk drives Capacity-Optimized Cloud-scale and Rack-Scale Storage Systems Compliance Data Archives and Data Life-Cycle Management Storage Systems Data Center Data-Protection and Data Back-up Infrastructure |
| Form Factor | 3.5" |
| Sūtījuma svars | 0.69 kg |
| Sūtījuma izmēri | 152 × 102 × 25 mm |
The SAS 12Gb/s interface supports up to 12.0 Gbit/s, though sustained rates depend on the 7200 RPM platters and 512MB cache.
Yes, the 3.5-inch 26.1mm form factor matches the industry-standard half-height slot used in most servers and arrays.
Mount the drive using the standard 3.5-inch screw holes; do not remove the breather filter label or apply pressure to the top cover.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?