TP-Link
TP-Link TL-SG1008MP 8-Port Gigabit PoE+ Switch
An 8-port Gigabit PoE+ switch delivering up to 30W per port with a 126W total budget, cutting power use by up to 75% for APs, cameras and phones
- 8 PoE+ ports power devices through one cable
- Up to 30W per port for high-power APs and cameras
- 126W total budget supports multiple devices at once
- Energy-efficient design cuts power use by up to 75%
- Silent metal chassis operates from 0 to 50 °C
8-Port Gigabit PoE+ Switch
The TL-SG1008MP is an 8-port Gigabit switch with every port supporting the PoE+ standard. It transfers data and power over a single Ethernet cable to simplify wired network expansion. A total power budget of 126W delivers up to 30W per port for devices such as wireless access points, IP cameras and IP phones. Innovative energy-efficient technology reduces power consumption by up to 75 percent.
Suitable for Small Business Networks
This switch suits installers who need to power multiple PoE+ devices from one unit without configuring software. The plug-and-play design works immediately on desktop or rackmount setups. Buyers who require managed features such as VLANs, QoS or remote monitoring should look at a managed switch instead. The unmanaged design also means no traffic prioritisation or port-level control is available.
126W Total PoE+ Power Budget
The single specification that decides fit is the 126W total power budget across all eight ports. Each port can supply up to 30W under the IEEE 802.3af/at standard. If the combined draw of connected devices exceeds 126W, the switch cannot power them all simultaneously. Check the power requirements of every endpoint before purchase.
Priekšrocības
- 8 PoE+ ports power devices through one cable
- Up to 30W per port for high-power APs and cameras
- 126W total budget supports multiple devices at once
- Energy-efficient design cuts power use by up to 75%
- Silent metal chassis operates from 0 to 50 °C
Specifikācijas
Šai precei pagaidām nav publicētu specifikāciju.
Jautājumi par šo preci
How do I install the TL-SG1008MP and what step is often missed?
Connect devices to the 8 RJ45 ports using Ethernet cables; the step often missed is checking that total connected PoE+ devices do not exceed the 126W power budget, with no single port drawing more than 30W.
What maintenance or replacement will the TL-SG1008MP need later?
No scheduled maintenance is required; keep ventilation clear so the operating temperature stays within 0 to 50 degrees Celsius, and replace the unit only if a port fails or power budget needs increase.
What limit appears first on the TL-SG1008MP under sustained heavy PoE load?
The 126W total power budget is the first limit; once combined draw from all 8 PoE+ ports reaches 126W, additional devices will not receive power even if individual ports stay below 30W.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Ubiquiti Networks
Ubiquiti Networks Cloud Key Gen2 UCK-G2-SSD wireless router
400,99 $
0.00513116BTC
Krājumā
