Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Three black 120 mm RGB case fans with dual light loops and remote hub

TROPRO

TROPRO RGB 120mm Case Fans 3-Pack with RF Remote Hub

SKU CH-JBXB-PVCEP

Three 120 mm fans with dual-loop addressable RGB, 366 lighting modes, RF remote control, hydraulic bearings and 33 CFM airflow at up to 1,800 RPM while staying below 16 dBA

  • TypeCase Fan
  • ColorBlack
  • LEDAddressable RGB

Option 3 Packs

  • Two-sided addressable RGB with 366 lighting modes
  • RF remote controls colours and effects without software
  • Hydraulic bearing and rubber pads keep noise below 16 dBA
  • 1500 RPM maximum airflow at 33 CFM for strong cooling
  • Three fans plus hub powered safely via 6-pin connector

TROPRO RGB 120mm Triple Pack

Three addressable RGB case fans ship with an RF wireless remote hub that controls lighting effects and colour cycles. The kit suits builders who want synchronised front and rear illumination without software configuration. Each fan includes dual independent light loops for 366 automated modes visible from both sides. This pack does not serve buyers who need PWM speed control via motherboard headers.

Thermals Noise and Power Draw

Nine-blade silica-gel rotors on hydraulic bearings spin between 1,100 and 1,800 RPM while rated noise stays below 16 dBA. The fans move 33 CFM at 12 V drawing 0.35 A and 3.8 W each. Rubber corner pads further dampen vibration transferred to the chassis. Users seeking fan-speed adjustment from the remote will not find that function here.

Build Integration

A proprietary 6-pin hub connects all three fans and the RF receiver, powered from a single 12 V source. The hub also provides a two-pin header that can replace the case reset button for manual colour cycling. No motherboard RGB header or PWM cable is required. Builders who rely on 4-pin PWM headers for automatic fan curves must use a different solution.

Priekšrocības

  • Two-sided addressable RGB with 366 lighting modes
  • RF remote controls colours and effects without software
  • Hydraulic bearing and rubber pads keep noise below 16 dBA
  • 1500 RPM maximum airflow at 33 CFM for strong cooling
  • Three fans plus hub powered safely via 6-pin connector

Specifikācijas

BrandTROPRO
TypeCase Fan
ColorBlack
LEDAddressable RGB

Citas šī modeļa versijas

Vēl 1 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install the three 120mm fans and the RF controller hub without damaging the LED beads?

Connect each fan's 6-pin plug to a matching port on the hub, then run the hub's power lead to a 12 V supply; inserting the 6-pin connector the wrong way will burn out the lamp beads.

What maintenance will the hydro-bearing fans need during their 20,000-hour rated life?

The sealed hydro bearing requires no lubrication; simply clean dust from the nine-blade silica-gel rotors and rubber pads periodically to keep noise below 16 dBA and airflow at 33 CFM.

At what point does the 12 V, 0.35 A, 3.8 W motor hit its thermal or speed ceiling under continuous load?

The fan tops out at 1,800 RPM; sustained operation at that speed is the first limit reached, while the 1,500 RPM figure marks the maximum airflow rating.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.