Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular metal mining unit, four fans, industrial finish

TROUVER

TROUVER Antminer L7 9050Mh mining hardware

SKU CH-HFW4-V0G8R

Scrypt ASIC miner delivering 9,050 MH/s at 3,424 W with four fans rated at 75 dB

  • Delivers 9030 MH/s hashrate for Litecoin mining
  • Draws 3424 Watts for high-throughput operation
  • Requires 220 V outlet for stable power supply
  • Operates at 75 dB noise level with four fans
  • Measures 195 x 290 x 370 mm and weighs 15000 g

Antminer L7 9050Mh miner

The Antminer L7 9050Mh is a crypto mining device built for the Scrypt algorithm used by Litecoin and Dogecoin. It delivers a rated hash rate of 9050 MH/s while drawing approximately 3424 watts. The unit measures 195 x 290 x 370 mm and weighs 15000 g. Four fans produce a noise level of 75 dB making it suitable only for dedicated hosting spaces.

Upgrade from lower hash rate Scrypt miners

This model replaces earlier Scrypt miners that offer significantly lower throughput per watt. The jump is worth it when electricity costs allow the 3424 W draw to be offset by the 9030 MH/s output. A 220 V outlet is mandatory because a step down transformer will not work. The hardware generates substantial heat so significant ventilation is required.

Installation requires 220 V power and airflow

Setting up the miner is straightforward if a 220 V circuit and adequate exhaust are already in place. The most common issue is underestimating the 75 dB noise and thermal load in a confined room. Without proper ventilation the unit will overheat and throttle. A step down transformer cannot supply the necessary power so verify the outlet type before purchase.

Priekšrocības

  • Delivers 9030 MH/s hashrate for Litecoin mining
  • Draws 3424 Watts for high-throughput operation
  • Requires 220 V outlet for stable power supply
  • Operates at 75 dB noise level with four fans
  • Measures 195 x 290 x 370 mm and weighs 15000 g

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

What are the exact dimensions and weight of the Antminer L7 9050Mh so I can plan rack space?

The unit measures 195 mm wide, 290 mm deep and 370 mm high, and weighs 15000 g.

What power connection does the 9050Mh model need and what common mistake should I avoid?

It requires a 220 V outlet; a step-down transformer will not work and is a frequent error.

How many fans does the 9050Mh have and what is the noise level for ventilation planning?

Four fans produce a noise level of 75 dB, so significant airflow is required.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.