Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black mini-tower PC case with magnetic mesh side panel and 80 mm PWM fan

UTLGAMENG

UTLGAMENG mini_tower PC case with 80 mm PWM fan 135 mm CPU cooler limit 220 mm GPU limit

SKU CH-ATE2-7CZCX

A mini-tower chassis for Micro-ATX or ITX boards with an included 80 mm PWM fan, 135 mm CPU cooler clearance and up to 250 mm GPU length

  • Typemini_tower
  • With Power SupplyNo
  • Hot-Swap Drive Bays0
  • 80mm FansNo
  • Fits Micro ATX and ITX motherboards up to 24.5 cm
  • 80 mm PWM fan adjusts speed to temperature automatically
  • USB 3.0 and USB 2.0 ports on the I/O panel
  • Supports graphics cards up to 220 mm or 250 mm without front drive
  • CPU cooler clearance limited to 135 mm height

Micro ATX and ITX chassis

The UTLGAMENG mini-tower fits Micro ATX boards up to 24.5 by 24.5 cm and ITX boards at 17 by 17 cm. It is built for compact systems that use an ATX power supply and a single 80 mm PWM fan. Builders who need hot-swap bays or multiple fan mounts should look elsewhere.

GPU and cooler clearance explained

With a front-mounted hard drive the graphics card limit is 220 mm; without the drive it extends to 250 mm. CPU cooler height is capped at 135 mm. These boundaries define what the case comfortably handles and where component choice runs out.

Single-fan airflow and front I/O

One 80 mm PWM fan handles intake and exhaust, so thermal headroom depends on that single unit. The front panel provides USB 3.0, USB 2.0, audio, mic, power and reset. A magnetic mesh side panel and dust filter aid airflow while keeping the build accessible.

Priekšrocības

  • Fits Micro ATX and ITX motherboards up to 24.5 cm
  • 80 mm PWM fan adjusts speed to temperature automatically
  • USB 3.0 and USB 2.0 ports on the I/O panel
  • Supports graphics cards up to 220 mm or 250 mm without front drive
  • CPU cooler clearance limited to 135 mm height

Specifikācijas

BrandUTLGAMENG
Typemini_tower
With Power SupplyNo
Hot-Swap Drive Bays0
80mm FansNo

Jautājumi par šo preci

Will a Micro-ATX board measuring 24.5 cm square fit in this case alongside my existing ATX power supply?

Yes, the chassis supports Micro-ATX boards up to 24.5 by 24.5 cm and standard ATX power supplies.

How can I confirm the 80 mm PWM fan is adjusting speed automatically after I build the system?

The included fan is an intelligent temperature-control model; listen for speed changes as the CPU load rises and check fan RPM in the BIOS hardware monitor.

Does the package include the magnetic mesh side panel and mounting screws, or must I purchase them separately?

The box contains the chassis, cold-pressed steel side panel, large magnetic suction mesh pad, installation screws, and the 80 mm PWM fan — no extra parts are required.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.