Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular metal mining unit with front grille and rear power sockets

VOVOV

VOVOV Antminer S19J PRO 104TH/s 3068W 220V Mining Hardware

SKU CH-ZN9R-3HFPH

A Bitcoin miner delivering 104 TH/s hash rate at 3068 W power draw on 220–240 V AC input

  • Rated 104 TH/s computing power for Bitcoin mining
  • Draws 3068 W from 220-240 V AC supply
  • Operates at 47-63 Hz input frequency range
  • Rated for 20 A AC current input
  • Certified for altitudes up to 2000 m

VOVOV Antminer S19J PRO 104TH/s

The VOVOV Antminer S19J PRO delivers a rated computing power of 104TH/s for Bitcoin mining. It operates on an AC voltage input range of 220-240V with a frequency range of 47-63Hz. The unit draws up to 20Amp and is rated for working altitudes up to 2000M. This hardware targets miners who need high hash-rate density in a single machine.

Included power cord enables immediate 220V

The supplier title confirms a power cord is bundled with the miner. This accessory allows direct connection to a compatible 220-240V supply without sourcing a separate cable. The cord matches the unit's 20Amp input rating and 3068W power draw. No additional software or controller accessories are mentioned in the supplied data.

3068W consumption and 2000M altitude limit define

At 3068W the miner demands a robust electrical circuit and cooling capacity. Operation between 900M and 2000M altitude reduces the maximum operating temperature by 1 degree Celsius per 300M gain. The 220-240V input range suits standard industrial or data-centre supplies. Buyers without 220V infrastructure or adequate power headroom cannot use this unit.

Priekšrocības

  • Rated 104 TH/s computing power for Bitcoin mining
  • Draws 3068 W from 220-240 V AC supply
  • Operates at 47-63 Hz input frequency range
  • Rated for 20 A AC current input
  • Certified for altitudes up to 2000 m

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

How often do the hash boards or fans on the 104TH/s Antminer S19J PRO need replacement?

Plan to inspect fans every few months and swap them when bearings get noisy; hash boards typically run until a chip fails, which varies with power quality and ambient conditions.

What limit appears first when the 3068W unit runs continuously at 220V?

The 20A AC input ceiling is reached before the 104TH/s hash rate can be exceeded, so the power feed becomes the bottleneck.

What noise and heat should I expect from the 104TH/s miner operating 24/7 at 220-240V?

Expect data-centre noise levels from high-speed fans moving heat from 3068W; intake air above 40°C or altitudes above 900m force the unit to throttle.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.