Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small green circuit board with Oculink ports and a PCIe 16x slot

Vszerda

Vszerda Oculink SFF-8612 SFF-8611 to PCIe 16x 4x Adapter with SATA Power Port

SKU CH-SKVM-W9SXM

Connects PCIe x16, x8 or x4 cards to an Oculink SFF-8611 or SFF-8612 host port and includes a SATA power connector limited to 12 V 2 A

  • Dimensions10 cm x 10 cm x 1 cm
  • Weight0.05 kilograms
  • Connect PCIe cards via Oculink SFF-8611 and SFF-8612 ports
  • Power devices with SATA 12V 2A auxiliary connector
  • Supports PCIe x16 x8 x4 cards including graphics and audio
  • Compact 10 cm form factor fits tight chassis spaces
  • Lightweight .05 kg design adds minimal load to motherboard

Oculink SFF-8612 SFF-8611 Adapter

This adapter converts an Oculink SFF-8611 or SFF-8612 interface into a PCIe x16 slot that operates at up to x4 electrical width. It accepts standard PCIe x16, x8 or x4 cards such as graphics, USB, LAN, 1394 or audio controllers. A SATA power port supplies up to 12 V 2 A for auxiliary power.

Upgrade from proprietary or limited slots

The converter lets you install a full-size PCIe expansion card in systems that only expose an Oculink 4x connection. It is worth the change when the host platform provides an Oculink port but lacks a native x16 slot for the desired add-in card.

Check host port and card power draw

Verify that the mainboard or backplane presents an SFF-8611 or SFF-8612 Oculink 4x connector. Confirm the target PCIe card does not require more than 12 V 2 A from the adapter's SATA power port; connect supplemental power directly to the card if its demand exceeds that limit.

Priekšrocības

  • Connect PCIe cards via Oculink SFF-8611 and SFF-8612 ports
  • Power devices with SATA 12V 2A auxiliary connector
  • Supports PCIe x16 x8 x4 cards including graphics and audio
  • Compact 10 cm form factor fits tight chassis spaces
  • Lightweight .05 kg design adds minimal load to motherboard

Specifikācijas

Brandxiwai
ModelSF-056
Part NumberSF-056
Dimensions10 cm x 10 cm x 1 cm
Weight0.05 kilograms

Jautājumi par šo preci

What clearance does the 10 cm by 10 cm board need inside the case?

The adapter measures 10 cm by 10 cm by 1 cm, so allow at least that footprint plus room for the SFF-8611 or SFF-8612 cable bend radius and the SATA power connector.

Which SFF-8611 or SFF-8612 port do I plug the OCuLink cable into, and which way does the latch face?

Insert the OCuLink cable into the onboard SFF-8611 or SFF-8612 receptacle with the latch facing the PCB edge; the connector is keyed so it only seats one way.

When should I replace the SATA power lead if I run a 12 V 2 A graphics card continuously?

Inspect the SATA power cable every 12 months; replace it if the pins show discoloration or the insulation becomes brittle from sustained 12 V 2 A load.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.