Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Transparent storage box holding 61 stainless steel cleaning needles in four diameters and a copper wire brush with curved handle

XIFOWE C-61 61-Piece 3D Printer Nozzle Cleaning Kit

SKU CH-7EVP-6H3QW

A 61-piece kit with stainless-steel needles in .18, .35, .6 and .8 mm sizes plus a copper-wire brush to clear clogged 3D printer nozzles

  • TypeC-61
  • Clears 0.2 mm nozzles with 20 precision 0.18 mm needles
  • Unblocks 0.4 mm nozzles using 20 stainless 0.35 mm needles
  • Opens 0.8 mm nozzles via 10 durable 0.6 mm needles
  • Cleans 1.0 mm nozzles with 10 tough 0.8 mm needles
  • Removes exterior residue fast with curved-handle copper brush

XIFOWE C-61 61-Piece Nozzle Cleaning Kit

The XIFOWE C-61 is a 61-piece maintenance kit built for 3D printing hobbyists and professionals who need to keep nozzles clear. It supplies stainless steel cleaning needles in four diameters plus a copper wire brush, all organised in a transparent storage case for quick access during routine upkeep or emergency unclogging.

Needle sizes matched to common nozzle bores

The kit includes 20 needles at 0.18mm for 0.2mm nozzles, 20 at 0.35mm for 0.4mm nozzles, 10 at 0.6mm for 0.8mm nozzles and 10 at 0.8mm for 1.0mm nozzles. Choosing the needle that corresponds to the installed nozzle bore is the single specification that determines whether this set can clear the blockage effectively.

Heat the nozzle first.

Preheating the hot end softens filament residue so the stiff stainless steel needles can pass through without forcing. The curved-handle copper brush cleans exterior surfaces and tight corners, but its bristles can deform if pressed too hard against hot metal. Users who skip preheating or select the wrong diameter often snap needles or fail to clear the clog. This kit does not suit printers that use nozzle sizes outside the 0.2mm to 1.0mm range.

Priekšrocības

  • Clears 0.2 mm nozzles with 20 precision 0.18 mm needles
  • Unblocks 0.4 mm nozzles using 20 stainless 0.35 mm needles
  • Opens 0.8 mm nozzles via 10 durable 0.6 mm needles
  • Cleans 1.0 mm nozzles with 10 tough 0.8 mm needles
  • Removes exterior residue fast with curved-handle copper brush

Specifikācijas

BrandXIFOWE
ModelC-61
Part NumberC-61
TypeC-61

Jautājumi par šo preci

What nozzle sizes do the 0.18mm and 0.35mm needles actually clear?

The 0.18mm needles are sized for 0.2mm nozzles and the 0.35mm needles for 0.4mm nozzles, matching the most common printer configurations.

Which hot-end types are the needles designed to fit?

The stainless steel needles suit MK8, MK10, V6 and Volcano hot ends, covering the majority of 1.75mm filament printers.

What does the copper brush clean and how is it shaped?

Dense copper bristles clean the nozzle exterior, hot-end parts and print bed; a curved handle and small top brush reach tight spots.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.