Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two black DDR5 memory sticks with heat spreaders

XPG

XPG LANCER AX5U6000C3016G-DCLABK 32GB (2 x 16GB) DDR5 6000 CL30 desktop RAM

SKU CH-5AG3-D4703 MPN AX5U6000C3016G-DCLABK

A 32 GB dual-channel DDR5 kit running at 6000 MT/s with CL30 timings and a black heat spreader

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 6000 (PC5 48000)
  • CAS LatencyCL30
  • Timing30-40-40
  • Voltage1.35V

Capacity LANCER 32GB (2 x 16GB)

Speed DDR5 6000

Latency CL30

  • 32 GB dual-channel kit keeps data flowing smoothly
  • DDR5 6000 speed moves large files quickly
  • CL30 latency reduces wait times in games
  • 35 V operation lowers heat and power draw
  • Black heat spreader dissipates heat without LED distraction

XPG LANCER 32GB DDR5-6000 kit

This 32GB kit contains two 16GB unbuffered DDR5 modules rated at 6000 MT/s with CL30 latency. The dual-channel set runs at 1.35V and includes Intel XMP 3.0 profiles for automatic configuration on compatible platforms. It is built for desktop systems that require high-speed memory.

Gamers and high-performance PC builders

Enthusiasts who want low-latency DDR5 at 6000 MT/s will benefit from the tight 30-40-40 timings and the black heat spreader. Users needing ECC, registered modules or RGB lighting should consider other kits. The unbuffered design suits standard consumer motherboards.

CAS latency 30 at DDR5 6000

The CL30 rating at 6000 MT/s is the primary figure that determines responsiveness in latency-sensitive workloads. If your platform or workflow demands lower latency at this data rate, this specification confirms suitability. Verify motherboard QVL for XMP 3.0 support before purchase.

Priekšrocības

  • 32 GB dual-channel kit keeps data flowing smoothly
  • DDR5 6000 speed moves large files quickly
  • CL30 latency reduces wait times in games
  • 35 V operation lowers heat and power draw
  • Black heat spreader dissipates heat without LED distraction

Specifikācijas

BrandXPG
SeriesLANCER
ModelAX5U6000C3016G-DCLABK
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR5 6000 (PC5 48000)
CAS LatencyCL30
Timing30-40-40
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered / Unregistered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
ColorBlack
Heat SpreaderYes
Recommend UseHigh Performance or Gaming Memory
LED ColorNone
Sūtījuma svars0.18 kg
Sūtījuma izmēri171 × 124 × 15 mm

Citas šī modeļa versijas

Vēl 3 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does the 288-pin DDR5 6000 kit fit a standard desktop DIMM slot?

Yes, the 288-pin form factor matches the standard DDR5 desktop DIMM socket, so it installs in any motherboard with DDR5 slots.

How do I enable the 6000 MT/s speed with CL30-40-40 timings at 1.35 V?

Enable the Intel XMP 3.0 profile in the BIOS; the kit will then run at DDR5 6000 with the rated 30-40-40 timings and 1.35 V without manual tuning.

When might the black heat spreaders need cleaning or the modules replacing?

Dust the heat spreaders with compressed air every few months; the modules themselves have no moving parts and only need replacement if they fail or capacity becomes insufficient.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.