Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
White heat-spreader UDIMM with exposed RGB light bar

XPG

XPG Lancer RGB DDR5 32GB 6000MHz CL40 desktop RAM

SKU CH-CG1Y-HKNW4

DDR5 desktop memory with 32 GB capacity, 6000 MHz speed, CL40 latency and customizable RGB lighting

  • DDR5 bandwidth boosts gaming responsiveness with 6000MHz speed
  • Customisable RGB lighting lets you match any build theme
  • PMIC and on-die ECC improve stability under heavy loads
  • Aluminium heat spreader keeps modules cool up to 85°C
  • Intel XMP 3.0 and AMD EXPO profiles enable one-click overclocking

XPG Lancer RGB DDR5 32GB 6000MHz

The XPG Lancer RGB DDR5 is a 32GB desktop memory kit rated at 6000MHz with CL40-40-40 timings. It operates at 1.25-1.45V and targets gamers and PC builders who want high-frequency DDR5 performance with customizable lighting.

Thermals noise and power draw

The module uses a crafted heatsink to dissipate heat across its operating range of 0°C to 85°C. A PMIC manages voltage regulation on the stick itself, helping maintain stable power delivery at 1.25-1.45V during sustained workloads.

Bundled software and accessories

Intel XMP 3.0 and AMD EXPO profiles let the firmware configure 6000MHz speeds automatically without manual BIOS tuning. Customizable RGB lighting can be synchronized through motherboard software for unified system aesthetics.

Priekšrocības

  • DDR5 bandwidth boosts gaming responsiveness with 6000MHz speed
  • Customisable RGB lighting lets you match any build theme
  • PMIC and on-die ECC improve stability under heavy loads
  • Aluminium heat spreader keeps modules cool up to 85°C
  • Intel XMP 3.0 and AMD EXPO profiles enable one-click overclocking

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

How do I install the XPG Lancer RGB DDR5 UDIMM and enable the 6000MHz speed without leaving it at the default JEDEC rate?

Insert the module into the motherboard DDR5 slot until the retention clips click, then enter the BIOS and activate the Intel XMP 3.0 or AMD EXPO profile so the kit runs at its rated 6000MHz CL40 instead of the base speed.

What maintenance or replacement will the PMIC and on-die ECC on this DDR5 kit require over time?

The integrated PMIC and on-die ECC have no user-serviceable parts; if errors exceed the correction capability or the PMIC fails, the entire 32GB module must be replaced.

At what temperature does the XPG Lancer RGB DDR5 hit its thermal limit during sustained loads?

The operating temperature ceiling is 85°C; prolonged operation at or above this point will trigger throttling or shutdown to protect the memory chips and PMIC.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.