Zyvpee
Zyvpee 2006ML-04W-S29 50x15mm 12V 0.08A 3-pin case fan
A 50×15 mm ball-bearing case fan running below 1600 RPM on 12 V 0.08 A with a 3-pin connector
- TypeCase Fan
- Bearing TypeBall
- RPM<1600 RPM
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Compact 50 mm square frame fits tight builds
- Ball bearing rated for long service life
- 12 V 0.08 A draw keeps power use low
- 3-pin connector enables speed monitoring
- Sub-1600 RPM design reduces noise output
50×15 mm 12 V ball-bearing case fan
The Zyvpee 2006ML-04W-S29 is a compact 50 mm square cooler with a 15 mm thickness. It runs on 12 V at 0.08 A and connects through a standard 3-pin header. The ball bearing supports speeds up to 1600 RPM. The black frame carries no LED lighting.
Replaces noisy or failed 5015 coolers
This unit fits the same mounting pattern as other 50×15 mm fans used on small-form-factor boards such as the E350 platform. The jump is worth it when the original sleeve-bearing fan has become loud or stopped spinning. The 3-wire connector restores speed reporting to the motherboard.
Suits cramped HTPC or embedded builds
Builders who need a low-profile 12 V cooler for tight chassis space will find the dimensions match. Buyers who want PWM control or higher airflow for larger heatsinks should look at something else. The non-LED design also avoids unwanted light in dark rooms.
Priekšrocības
- Compact 50 mm square frame fits tight builds
- Ball bearing rated for long service life
- 12 V 0.08 A draw keeps power use low
- 3-pin connector enables speed monitoring
- Sub-1600 RPM design reduces noise output
Specifikācijas
| Brand | Zyvpee |
|---|---|
| Series | 2006ML-04W-S29 |
| Model | 2006ML-04W-S29 |
| Type | Case Fan |
| Bearing Type | Ball |
| RPM | <1600 RPM |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling Fan |
| Dimensions | 50*15MM |
Jautājumi par šo preci
Will the 50 mm by 15 mm frame fit a standard 5015 mounting pattern?
The fan measures 50 by 15 mm, matching the 5015 form factor used in many compact CPU coolers and HTPC chassis.
How do I connect the three-pin lead to a motherboard header without reversing polarity?
Align the keyed notch on the three-pin connector with the tab on the 12 V fan header; the black wire is ground, yellow is 12 V, and the third wire carries the tachometer signal.
When should I expect to replace the ball-bearing fan in continuous 12 V operation?
Ball bearings typically last several years at the rated 1600 RPM; plan replacement if RPM drops noticeably or audible noise increases.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001046BTC
Krājumā