Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 40mm square case fan with 8 wires and 8 pins

Zyvpee

Zyvpee 9CRA0412P5J08 40mm 4056 12V 1.4A 8 wires 8 pins case fan

SKU CH-5WG7-J9H6V

40mm server cooling fan with 2-ball bearing, 12V 1.4A power and 8-wire connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector8 Wires
  • ColorBlack
  • LEDNon-LED
  • 40 mm frame fits tight server chassis
  • 2-ball bearing extends operational lifespan
  • 12 V 1.4 A delivers strong airflow
  • 8-wire 8-pin connector enables advanced monitoring
  • non-LED black design suits professional builds

40 mm Server Cooling Fan

The Zyvpee 9CRA0412P5J08 is a 40 by 56 mm case fan built for server cooling applications. It operates on a 12 V supply and draws 1.4 A through an 8 wire 8 pin connector. The unit uses a 2 ball bearing assembly and ships without LED lighting. It suits administrators fitting compact rack hardware where space is tight.

Thermals Noise and Power

At 12 V the motor pulls 1.4 A, giving a predictable power envelope for dense chassis layouts. The dual ball bearing design maintains consistent rotation under continuous duty cycles typical of server environments. No LED circuitry means no extra current draw or light bleed in dark rack aisles. Acoustic output scales with the load imposed by the host system.

Eight Wire Eight Pin Connector

The 8 wire 8 pin power connector is the single specification that determines whether this fan fits your backplane or fan controller. Verify the pin-out and voltage rails on your hardware before purchase. Builders needing standard 3 pin or 4 pin PWM headers cannot use this unit without an adapter. Buyers who want a simple plug in replacement for consumer cases should look elsewhere.

Priekšrocības

  • 40 mm frame fits tight server chassis
  • 2-ball bearing extends operational lifespan
  • 12 V 1.4 A delivers strong airflow
  • 8-wire 8-pin connector enables advanced monitoring
  • non-LED black design suits professional builds

Specifikācijas

BrandZyvpee
Series9CRA0412P5J08
Model9CRA0412P5J08
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector8 Wires
ColorBlack
LEDNon-LED
FeaturesServer Cooling
Dimensions40*56mm

Jautājumi par šo preci

How do I install the Zyvpee 9CRA0412P5J08 fan with its 8-wire 8-pin connector?

Align the 8-pin plug with the motherboard or controller header, matching the keyed notch, and press firmly until seated; the step often missed is verifying each of the eight wires carries the correct signal for speed control and monitoring.

What maintenance will the 2 Ball bearing in this 40mm fan need later?

The dual ball bearing design is sealed for life and requires no lubrication; if noise or vibration appears after extended use, the entire fan unit should be replaced rather than serviced.

At what point does the 1.4 A current draw become the limiting factor during sustained operation?

Running continuously at 12 V draws 1.4 A, so the power header or supply rail must sustain that load without voltage drop; the current limit is reached before thermal limits in most server chassis.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.