Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 100mm blower fan with 4-pin PWM connector

Zyvpee

Zyvpee BA10033B12S 100mm 4-pin PWM blower case fan

SKU CH-K7J5-N2VAH

100 mm blower fan with 4-pin PWM control and dual ball bearings for targeted case cooling

  • TypeBlower
  • CompatibilityCase
  • Fan Size100mm
  • Bearing Type2 Ball
  • Power Connector4 Pin
  • ColorBlack
  • 100 mm blower design directs focused airflow through tight chassis
  • 4-pin PWM control adjusts speed automatically to thermal load
  • Dual ball bearing extends operating life under continuous use
  • 12 V 2.85 A rating delivers strong static pressure for dense heatsinks
  • Compact 97 × 33 mm frame fits 1U and small-form-factor cases

Zyvpee 100 mm blower fan for R510G6

This 100 mm blower-style case fan uses a 4-pin PWM connector and dual ball bearings. It is built for the R510G6 chassis and runs on 12 V at 2.85 A. The 97 x 33 mm frame fits the designated mounting pattern.

4-pin PWM control limits

The 4-pin PWM interface allows motherboard or controller speed regulation. Voltage is fixed at 12 V and current draw is 2.85 A. The header must supply that current; a weaker header will not run the fan at full speed.

Check R510G6 mount and header before ordering

Verify the chassis has the 97 x 33 mm blower cut-out and a 4-pin PWM header rated for 2.85 A. If your case uses a different mounting pattern or a 3-pin header, this fan will not fit or control correctly.

Priekšrocības

  • 100 mm blower design directs focused airflow through tight chassis
  • 4-pin PWM control adjusts speed automatically to thermal load
  • Dual ball bearing extends operating life under continuous use
  • 12 V 2.85 A rating delivers strong static pressure for dense heatsinks
  • Compact 97 × 33 mm frame fits 1U and small-form-factor cases

Specifikācijas

SeriesBA10033B12S
ModelBA10033B12S
TypeBlower
CompatibilityCase
Fan Size100mm
Bearing Type2 Ball
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions97*33mm

Jautājumi par šo preci

Should I choose the 100 mm blower or a standard axial fan for my case?

The 100 mm blower pushes air through its 97*33 mm frame, making it suited for tight channels or GPU coolers where a standard axial fan cannot direct flow effectively.

What does the 2.85 A rating mean once the fan is installed?

At 12 V the fan can draw up to 2.85 A, so the motherboard header or fan controller must supply that current for full PWM speed range.

How does the 4-pin PWM connector limit control in practice?

The 4-pin PWM connector allows the motherboard to vary speed precisely, but the header’s amp rating caps the maximum RPM the fan can reach.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.