Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small black blower fan 75 by 30 mm two pin connector

Zyvpee

Zyvpee DFB753012H 75x30mm 12V 2.9W Blower Case Fan

SKU CH-ZWHJ-Q2Q22

A 75x30mm blower-style case fan delivering 12V 2.9W cooling with a ball bearing and 2-pin connector

  • TypeCPU Cooler Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 75x30mm blower fits tight chassis spaces
  • Ball bearing ensures reliable long-term operation
  • 12V 2.9W draw keeps power consumption low
  • Two-pin connector simplifies motherboard installation
  • Non-LED black design suits stealth builds

75x30mm blower fan for tight case builds

The Zyvpee DFB753012H is a 12 V blower-style case fan measuring 75 by 30 millimetres. It draws 2.9 watts and uses a ball bearing for long service life. The turbine design pushes air through narrow channels, making it suited for small-form-factor enclosures or CPU coolers that need directed airflow.

Two-pin power and screw mounting

The fan connects via a standard two-pin, two-wire header, so it plugs directly into most motherboard or controller sockets. No PWM signal wire is present, meaning speed control relies on voltage adjustment rather than a fourth pin. Installation uses four corner screw holes; verify that your chassis or heatsink provides matching 75 mm spacing before fitting.

Check clearance and voltage requirements

Confirm that your case or cooler can accommodate a 30 mm thick blower without fouling cables or panels. Ensure the system provides a 12 V DC header, as the fan is rated for that voltage only. Buyers who need PWM speed signalling or a thinner profile should look for alternative models.

Priekšrocības

  • Compact 75x30mm blower fits tight chassis spaces
  • Ball bearing ensures reliable long-term operation
  • 12V 2.9W draw keeps power consumption low
  • Two-pin connector simplifies motherboard installation
  • Non-LED black design suits stealth builds

Specifikācijas

Brand3ccooler.com
SeriesDFB753012H
ModelDFB753012H
TypeCPU Cooler Fan
CompatibilityCase
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesBlower
Dimensions75*30mm

Jautājumi par šo preci

How can I verify the blower fan is running correctly after I install it?

Connect the 2-pin plug to a 12 V header; the ball-bearing blower should spin up smoothly and move air through the 75×30 mm housing without rattling.

What comes in the box and what must I source separately?

The package contains the DFB753012H blower fan with its two-wire lead; you will need a 12 V 2-pin motherboard header or adapter if your board lacks one.

Which version of this blower matches a 75 mm by 30 mm mounting pattern?

The DFB753012H is the only model listed with those exact dimensions and a 12 V 2.9 W rating, so it is the correct choice for that cut-out.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.