Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 60 mm square case fan with maglev bearing and 3-pin connector

Zyvpee

Zyvpee EB60251S1-Q010-F99 60*25mm 12V 1.56W 3-pin case fan

SKU CH-K05K-S7FP5

A 60 mm maglev case fan spinning at 3000 to 3499 RPM with a noise level of 25 to 30 dBA and a 3 pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeMaglev
  • RPM3000-3499 RPM
  • Noise Level25 - 30 dBA
  • Power Connector3 Pin
  • Maglev bearing cuts friction for longer life
  • 3000-3499 RPM moves air through tight spaces
  • 25-30 dBA keeps background noise low
  • 60x60x25 mm fits standard 60 mm mounts
  • 12 V 1.56 W draws minimal power from the header

Zyvpee 60 mm Maglev case fan

The Zyvpee EB60251S1-Q010-F99 is a 60 mm square frame case fan built with a Maglev bearing. It runs on 12 V DC power and draws 1.56 W. A three-pin connector provides direct voltage control for the motor. The black, non-LED housing suits builds that prefer no internal lighting.

Suits compact builds needing 60 mm mounting

This fan fits cases or coolers that accept a 60 x 60 x 25 mm footprint and a three-pin header. Buyers who need a larger frame, a four-pin PWM header or addressable RGB lighting should look at other models. The Maglev bearing targets users who want reduced friction without the cost of fluid-dynamic alternatives.

3000–3499 RPM speed range at 25–30 dBA

The operating range spans 3000 to 3499 RPM while producing 25 to 30 dBA of noise. This single specification decides whether the airflow and acoustic profile match the thermal target of your build..verify the rpm and noise figures against your component layout before purchasing.

Priekšrocības

  • Maglev bearing cuts friction for longer life
  • 3000-3499 RPM moves air through tight spaces
  • 25-30 dBA keeps background noise low
  • 60x60x25 mm fits standard 60 mm mounts
  • 12 V 1.56 W draws minimal power from the header

Specifikācijas

SeriesEB60251S1-Q010-F99
ModelEB60251S1-Q010-F99
TypeCase Fan
CompatibilityCase
Bearing TypeMaglev
RPM3000-3499 RPM
Noise Level25 - 30 dBA
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*25mm

Jautājumi par šo preci

How do I pick between the available versions of this 60 mm case fan?

Only the EB60251S1-Q010-F99 model is listed, so there is no alternative version to choose from.

What does the 3000-3499 RPM range mean once the fan is installed in a case?

The fan will spin between 3000 and 3499 revolutions per minute, producing 25 to 30 dBA of noise at 12 V and 1.56 W.

What does the 3-pin connector limit in practice?

The 3-pin DC connector allows voltage-based speed control but does not support PWM signalling.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.