Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

Zyvpee

Zyvpee KD1204PKS2 40x20mm 12V 0.9W 2-wire case fan

SKU CH-0Q7F-Q3JXJ

Compact 40 × 20 mm case fan runs at 12 V, 0.9 W and under 1600 RPM with a ball bearing and two-wire connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • RPM<1600 RPM
  • Power Connector2 Wires
  • ColorBlack
  • Compact 40 × 20 mm frame fits tight chassis spaces
  • Ball bearing design extends operational lifespan
  • 12 V 0.9 W draw keeps power usage low
  • Two-wire connector simplifies installation
  • Sub-1600 RPM speed limits noise output

40 × 20 mm 12 V case fan

The Zyvpee KD1204PKS2 is a compact 40 mm square fan with a 20 mm thickness designed for CPU cooler and small-form-factor chassis use. It runs on 12 V power and draws 0.9 W through a two-wire lead. The black frame carries no lighting.

Two-wire ball-bearing installation

The fan mounts with standard 40 mm screw holes and connects via a bare two-wire cable that must be matched to a 12 V header or adapter. Polarity reversal will prevent the motor from starting. Ball bearings tolerate orientation changes but can develop audible rattle if the shaft is bent during fitting.

Builders needing a slim 40 mm replacement

Suits tight CPU coolers, router enclosures or switch gear that specify a 4020 form factor and a sub-1600 RPM ceiling. Not for PWM-controlled headers, four-pin ecosystems or anyone requiring speed reporting or RGB illumination.

Priekšrocības

  • Compact 40 × 20 mm frame fits tight chassis spaces
  • Ball bearing design extends operational lifespan
  • 12 V 0.9 W draw keeps power usage low
  • Two-wire connector simplifies installation
  • Sub-1600 RPM speed limits noise output

Specifikācijas

BrandZyvpee
SeriesKD1204PKS2
ModelKD1204PKS2
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
RPM<1600 RPM
Power Connector2 Wires
ColorBlack
LEDNon-LED
Dimensions40*20mm

Jautājumi par šo preci

How can I confirm the 12 V fan is running at its rated speed after installation?

Measure the RPM with monitoring software or a hardware tachometer; the unit should read below 1600 RPM when powered from a 12 V header.

What comes in the box and what must be sourced separately?

The package contains the 40 mm × 20 mm ball-bearing fan with a 2-wire lead; mounting screws and any adapter cables are not included.

Which version should I choose for a 12 V header that supplies up to 0.9 W?

The KD1204PKS2 model is the only variant listed and matches a 12 V, 0.9 W, 2-wire specification.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.