Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small black 40 mm maglev case fan with 2 pin connector

Zyvpee

Zyvpee KDE0504PKV1-A 40 mm Maglev case fan 1600 RPM 2 pin

SKU CH-E5KM-SAWKE

A 40 mm maglev case fan spinning at 1600 RPM with a 2-pin connector for compact server or router cooling

  • TypeCase Fan
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction for quieter operation
  • 1600 RPM maximum speed delivers focused airflow
  • 5 V 0.8 W draw keeps power use low
  • 40 mm by 20 mm frame fits tight 1U spaces
  • Two-pin connector simplifies installation in servers

Zyvpee 40 mm Maglev Case Fan

The Zyvpee KDE0504PKV1-A is a 40 mm case fan that uses a maglev bearing and runs at less than 1600 RPM. It draws 5 V and 0.8 W through a two-pin connector. The compact 40 by 20 mm frame fits tight 1U server chassis and small network appliances. Builders who need a larger frame or higher static pressure should look elsewhere.

Capacity and headroom at 1600 RPM

At under 1600 RPM the fan delivers modest airflow suited to low-power CPUs, router boards or switch ASICs in a 1U enclosure. The 0.8 W draw leaves ample headroom on a 5 V header. It will not satisfy high-density GPU arrays or multi-core workstations that demand greater volumetric flow.

Two-pin connector and maglev bearing

The two-pin power lead provides simple DC operation without PWM control. Maglev bearing technology reduces mechanical friction for quieter, longer-lasting rotation. No LED lighting, speed sensor or mounting screws are included in the package.

Priekšrocības

  • Maglev bearing reduces friction for quieter operation
  • 1600 RPM maximum speed delivers focused airflow
  • 5 V 0.8 W draw keeps power use low
  • 40 mm by 20 mm frame fits tight 1U spaces
  • Two-pin connector simplifies installation in servers

Specifikācijas

BrandZyvpee
SeriesKDE0504
ModelKDE0504PKV1-A
TypeCase Fan
Bearing TypeMaglev
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
Featuresdc cooling
Dimensions40 * 20 mm
Package Contentsrefer to title

Jautājumi par šo preci

Will the 40 mm KDE0504PKV1-A fit the 2-pin header on my older 1U server board?

The fan uses a 2-pin 5 V connector rated at .8 W, matching standard 2-pin 5 V headers found on many legacy 1U systems.

How can I confirm the maglev fan is running at the rated 1600 RPM after installation?

Check the fan speed reading in the server BIOS or a hardware-monitoring utility; it should report close to 1600 RPM under load.

Does the package include mounting screws or only the 40 mm fan itself?

The supplier lists package contents as "refer to title", which names the 40 mm fan, 2-wire 2-pin lead and 5 V .8 W rating — no screws are mentioned.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.