Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 60mm square case fan with Maglev bearing and 3-pin connector

Zyvpee

Zyvpee KDE1206PFV1 60mm 12V 1.4W 3-pin case fan

SKU CH-MD5V-JW42N

A 60mm Maglev case fan for CPU coolers running under 1600 RPM at 20 to 25 dBA with a 3-pin 12V 1.4W connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Noise Level20 - 25 dBA
  • Power Connector3 Pin
  • Maglev bearing runs quietly at 20–25 dBA
  • Low 1.4 W draw keeps system power modest
  • 60 × 10 mm frame fits tight CPU-cooler mounts
  • 3-pin 12 V connector works with standard headers
  • Spins below 1600 RPM for gentle airflow

Compact 60mm CPU cooler fan

The Zyvpee KDE1206PFV1 is a 60mm case fan built for CPU cooler compatibility. It runs on 12V power and draws 1.4W through a standard 3-pin connector. The black, non-LED frame suits builds that do not need lighting.

Maglev bearing with low noise

A maglev bearing keeps friction low while the fan spins below 1600 RPM. Noise output stays between 20 and 25 dBA in normal operation. The slim 10mm thickness helps it fit tight cooler stacks.

Three-wire speed monitoring

The 3-pin lead reports RPM to the motherboard so fan curves can react to load. No RGB or PWM control is included, so colour sync and precise duty-cycle tuning are not available. Buyers who want addressable lighting or 4-pin PWM control should look elsewhere.

Priekšrocības

  • Maglev bearing runs quietly at 20–25 dBA
  • Low 1.4 W draw keeps system power modest
  • 60 × 10 mm frame fits tight CPU-cooler mounts
  • 3-pin 12 V connector works with standard headers
  • Spins below 1600 RPM for gentle airflow

Specifikācijas

BrandZyvpee
SeriesKDE1206
ModelKDE1206PFV1
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Noise Level20 - 25 dBA
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions60 * 10mm

Jautājumi par šo preci

How do I install the Zyvpee KDE1206PFV1 60mm fan and what step is often missed?

Mount the 60mm frame using four screws through the corner holes, then plug the 3-pin connector into a 12V motherboard header; the step often missed is ensuring the Maglev bearing spins freely before tightening all screws.

What maintenance or replacement will the Zyvpee KDE1206PFV1 need later?

The Maglev bearing reduces contact wear, so only periodic dust cleaning of the blades and frame is needed; replacement is required only if RPM drops below spec or noise exceeds 25 dBA.

What limit appears first on the Zyvpee KDE1206PFV1 during sustained use?

The 1600 RPM ceiling and 1.4W power draw are the first limits; the Maglev bearing maintains stable speed up to that point without thermal throttling.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.