Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 60x15mm 12V case fan with 3-pin connector

Zyvpee

Zyvpee KDE1206PHV2 60x15mm 12V 1.1W 3-pin case fan

SKU CH-3QQ7-M9GBR

A compact 60 x 15 mm case fan running at 12 V and 1.1 W with a ball bearing for 20 to 25 dBA noise

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Noise Level20 - 25 dBA
  • Power Connector3 Pin
  • ColorBlack
  • Quiet operation at 20–25 dBA for low-noise builds
  • Ball bearing design for durable, long-life cooling
  • Compact 60×15 mm size fits tight CPU coolers
  • 12 V, 1.1 W draw keeps power use minimal
  • Standard 3-pin connector works with most motherboards

Compact 60 mm frame for tight CPU coolers

The Zyvpee KDE1206PHV2 is a 60 by 15 millimetre fan built for CPU coolers that demand a slim profile. It runs on 12 volts and draws 1.1 watts through a standard three-pin connector. Ball-bearing construction keeps the acoustic output between 20 and 25 dBA. The black, non-LED housing suits builds that prefer a subdued look.

Replaces worn or noisy 6015 fans on existing

When an original 6015 cooler fan fails or becomes audible, this unit restores airflow without changing the mounting pattern. The jump is worth it if the current fan uses a sleeve bearing that has begun to rattle or if the connector has been damaged. Identical 60 by 15 millimetre dimensions ensure the screw holes line up with most low-profile tower or downdraft coolers.

Fits three-pin headers

A three-pin power lead connects directly to any motherboard or fan-controller header that supplies 12 volts. Voltage-based speed control adjusts the fan curve without occupying a four-pin PWM channel. The slim 15 millimetre thickness leaves clearance for tall memory modules or voltage-regulator heatsinks that sit close to the cooler base.

Priekšrocības

  • Quiet operation at 20–25 dBA for low-noise builds
  • Ball bearing design for durable, long-life cooling
  • Compact 60×15 mm size fits tight CPU coolers
  • 12 V, 1.1 W draw keeps power use minimal
  • Standard 3-pin connector works with most motherboards

Specifikācijas

BrandZyvpee
SeriesKDE1206PHV2
ModelKDE1206PHV2
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeBall
Noise Level20 - 25 dBA
Power Connector3 Pin
ColorBlack
LEDNon-LED
Dimensions60*15MM

Jautājumi par šo preci

Will the 60x15mm frame fit my CPU cooler mounting holes?

The fan measures 60mm square by 15mm thick, matching the standard 6015 footprint used on many compact CPU coolers.

How do I connect the 3-pin plug so the motherboard reads speed correctly?

Align the three wires — power, ground, and tach — with the header key; reversing the connector loses the RPM signal.

When should I plan to replace the ball-bearing fan?

Ball bearings typically run for years at 20-25 dBA; replace the unit if noise rises or airflow drops noticeably.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.