Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small black 60 mm square case fan 25 mm thick two wire sleeve bearing

Zyvpee

Zyvpee KDE1206PTS3 60 mm 12 V 1.12 W sleeve case fan

SKU CH-6FNV-CMV7Z

A 60 mm sleeve-bearing case fan running below 1600 RPM at 12 V with a 2-pin connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeSleeve Bearing
  • RPM<1600 RPM
  • Power Connector2 Wires
  • ColorBlack
  • 60 mm frame fits tight CPU cooler builds
  • sleeve bearing keeps noise below 1600 RPM
  • 12 V 1.12 W draw limits power load
  • two-wire connector simplifies motherboard hookup
  • black non-LED design suits stealth systems

Compact 60 mm 12 V fan for tight builds

The Zyvpee KDE1206PTS3 is a 60 by 25 mm case fan that runs on 12 V and draws 1.12 W. Its two-wire, two-pin connector fits standard headers on CPU coolers, industrial PCs or small-form-factor chassis. The sleeve bearing keeps the motor simple and the all-black frame blends into any interior.

Airflow ceiling at 1600 RPM

At under 1600 RPM the fan moves enough air for low-power CPUs, embedded boards or auxiliary spot cooling. It will not satisfy high-TDP processors or multi-GPU setups that demand sustained static pressure. Buyers who need more airflow or PWM control should look elsewhere.

Bare-bones two-wire connection

Only power and ground wires are provided; there is no tachometer or PWM lead so the motherboard cannot monitor or regulate speed. No mounting screws, adapters or software utilities are included. The package contains the fan unit alone.

Priekšrocības

  • 60 mm frame fits tight CPU cooler builds
  • sleeve bearing keeps noise below 1600 RPM
  • 12 V 1.12 W draw limits power load
  • two-wire connector simplifies motherboard hookup
  • black non-LED design suits stealth systems

Specifikācijas

BrandZyvpee
SeriesKDE1206PTS3
ModelKDE1206PTS3
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeSleeve Bearing
RPM<1600 RPM
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesCASE FAN
Dimensions60*25MM

Jautājumi par šo preci

Will the 60 mm frame and 25 mm thickness fit the mounting holes on my older CPU cooler?

The fan measures 60 mm by 25 mm, matching the standard 6025 form factor used on many legacy CPU coolers and IPC chassis.

How can I confirm the sleeve bearing fan is spinning at the rated speed once installed?

At 12 V the fan should run below 1600 RPM; you can verify this in the BIOS hardware monitor or with a tachometer on the two-wire lead.

Does the box include any mounting screws or a 3-pin adapter for my motherboard header?

The package contains only the 60 mm 12 V 1.12 W sleeve bearing fan with two wires and two pins; screws and pin adapters are not included.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.