Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black square 90×90×25 mm case fan with 3-pin connector

Zyvpee

Zyvpee MMF-09D24TS RP1 90×90×25mm 24V .19A case fan

SKU CH-06F5-B73HG

A 90×90×25 mm ball-bearing case fan running on 24 V DC at 0.19 A with a three-pin connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball bearing for long service life
  • 24 V DC at 0.19 A for efficient cooling
  • 90 × 90 × 25 mm fits standard 9 cm mounts
  • 3-pin power connector enables speed monitoring
  • Compatible with Mitsubishi A740 and F740 PLC coolers

90 mm 24 V DC case fan

This 90 mm square fan runs on 24 V DC and draws 0.19 A. It uses a ball bearing and a three-pin power connector. The black frame measures 90 by 90 by 25 mm and has no LED lighting. It is built for industrial cooling such as Mitsubishi A740 and F740 drives or PLC ABB coolers.

Direct replacement for 9225 and 9025 frames

The fan matches the 9225 and 9025 mounting patterns used on Mitsubishi A740 and F740 units. It also fits PLC ABB coolers that specify the CA1640H01 reference. The jump is worth it when the original fan has worn bearings or reduced airflow and a drop-in 24 V replacement is required.

Steady airflow under continuous duty

Ball-bearing construction keeps rotation stable during long operating periods in enclosed cabinets. The DC square cooler design maintains consistent speed without the voltage spikes seen in short-burst tests. It suits environments where the fan runs continuously rather than cycling on and off.

Priekšrocības

  • Ball bearing for long service life
  • 24 V DC at 0.19 A for efficient cooling
  • 90 × 90 × 25 mm fits standard 9 cm mounts
  • 3-pin power connector enables speed monitoring
  • Compatible with Mitsubishi A740 and F740 PLC coolers

Specifikācijas

SeriesMMF-09D24TS RP1
ModelMMF-09D24TS RP1
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions90*90*25mm

Jautājumi par šo preci

What mounting-hole spacing does the 90 mm square frame use?

The frame measures 90 by 90 mm with a 25 mm thickness; mounting holes follow the standard 90 mm square pattern.

Which way should the 3-pin connector face when inserting it into the motherboard header?

Align the keyed 3-pin plug so the missing-pin slot matches the header tab; forcing it backwards bends pins.

When should the ball-bearing fan be swapped out?

Replace the unit once bearing noise or vibration becomes noticeable, as ball bearings wear irreversibly.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.