Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Zyvpee AC turbo centrifugal cooler, two-tone finish, 146 by 270 mm case fan

Zyvpee

Zyvpee RF3D-146-180 K506 DSF-2326 146x270mm ACS800 230V 50/60Hz 1.31/1.45A industrial cooling fan

SKU CH-VT2Z-G914G

146 by 270 mm AC turbo fan with ball bearing runs on 230 V at 50 or 60 Hz drawing 1.31 or 1.45 A

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Color2-Tone
  • LEDNon-LED
  • FeaturesAC turbo Fan
  • Ball bearing extends service life
  • 146 × 270 mm frame fits standard enclosures
  • 230 V 50/60 Hz suits global mains
  • 31/1.45 A draw keeps energy cost low
  • Inverter centrifugal design delivers focused airflow

RF3D-146-180 AC turbo fan for inverter cabinets

The Zyvpee RF3D-146-180 is an AC centrifugal cooler built for 230 V 50/60 Hz inverter enclosures such as the ACS800. It draws 1.31 A at 50 Hz and 1.45 A at 60 Hz. Ball-bearing construction targets continuous industrial duty.

230 V 50/60 Hz supply defines the operating envelope

The fan runs directly from single-phase mains at 230 V, 50 Hz or 60 Hz. Current rises from 1.31 A to 1.45 A when frequency shifts to 60 Hz. No variable-speed control or PWM input is provided. Voltage and frequency must stay within the rated range.

146×270 mm footprint fits standard cut-outs

The 146 mm by 270 mm frame matches common inverter ventilation openings. Ball bearings allow any mounting orientation without lubrication concerns. Wiring is limited to live, neutral and earth; incorrect phasing will not reverse rotation. Verify cut-out dimensions and mains rating before fitting.

Priekšrocības

  • Ball bearing extends service life
  • 146 × 270 mm frame fits standard enclosures
  • 230 V 50/60 Hz suits global mains
  • 31/1.45 A draw keeps energy cost low
  • Inverter centrifugal design delivers focused airflow

Specifikācijas

SeriesRF3D-146-180
ModelRF3D-146-180
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Color2-Tone
LEDNon-LED
FeaturesAC turbo Fan

Jautājumi par šo preci

How do I know this RF3D-146-180 model fits my ACS800 inverter cabinet?

The fan measures 146 by 270 millimetres and is built as a direct case-fan replacement for the ACS800 230 volt 50/60 hertz drive; match those dimensions and voltage to your existing cut-out.

What does the 1.31/1.45 amp rating tell me about running current?

At 50 hertz the fan draws 1.31 amps and at 60 hertz it draws 1.45 amps, so size your supply and wiring for the higher figure when the inverter runs on 60 hertz mains.

What does the 50/60 hertz rating mean for installation?

The motor is rated for both 50 and 60 hertz AC supplies, so it can be used in regions with either mains frequency without modification.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.