Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 120 by 38 mm case fan with four wire connector

Zyvpee

Zyvpee V34809-INT1F 120x38mm 4-Wire 12V 3.3A >7000 RPM Ball Bearing Case Fan

SKU CH-5V4Q-R5ZT1

High-speed 120 x 38 mm ball-bearing fan spins above 7000 RPM at 12 V, 3.3 A for server-grade cooling

  • TypeCase Fan
  • Bearing TypeBall
  • RPM>7000 RPM
  • Power Connector4 Wires
  • ColorBlack
  • LEDNon-LED
  • High airflow for dense server chassis with 120 mm × 38 mm frame
  • Sustained speed above 7000 RPM keeps components cool under load
  • Ball bearing design extends operating life in continuous duty
  • Four-wire PWM connector enables precise speed control from the motherboard
  • 12 V 3.3 A rating matches high-performance server power budgets

High-Speed Server Cooling Fan

The Zyvpee V34809-INT1F is a 120mm by 38mm case fan built for server environments that demand high static pressure. It suits system integrators and technicians upgrading rackmount or workstation chassis where airflow density is critical.

Four-Wire PWM Control Limits

The 4-wire connector enables pulse-width modulation speed control from a compatible motherboard or fan controller header. Without PWM support the fan will default to its maximum speed of over 7000 RPM, drawing 3.3 amps at 12 volts continuously.

Straightforward 120mm Mounting

Standard 120mm screw holes align with common chassis and radiator mounts for simple installation. The thick 38mm profile can obstruct nearby components or side panels in tight builds, so verify internal clearance before fitting.

Priekšrocības

  • High airflow for dense server chassis with 120 mm × 38 mm frame
  • Sustained speed above 7000 RPM keeps components cool under load
  • Ball bearing design extends operating life in continuous duty
  • Four-wire PWM connector enables precise speed control from the motherboard
  • 12 V 3.3 A rating matches high-performance server power budgets

Specifikācijas

BrandZyvpee
SeriesV34809-INT1F
ModelV34809-INT1F
TypeCase Fan
Bearing TypeBall
RPM>7000 RPM
Power Connector4 Wires
ColorBlack
LEDNon-LED
FeaturesServer Cooling
Dimensions120*38mm

Jautājumi par šo preci

Which version of the Zyvpee V34809-INT1F should I pick for a 120 mm fan slot?

This model is a single 120 mm by 38 mm unit with a 4-wire PWM connector, so it fits any standard 120 mm mounting pattern.

What does the >7000 RPM rating mean once the fan is installed in a server chassis?

At full speed the impeller spins above 7000 RPM, delivering very high static pressure for dense server heatsinks or restricted airflow paths.

How does the 4-wire connector control the fan and what limits its speed in practice?

The fourth wire carries a PWM signal from the motherboard or fan controller; the 12 V 3.3 A rating sets the maximum electrical draw, so speed is capped by the PWM duty cycle and the 7000 RPM mechanical limit.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.