SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00501831BTC
Stokta
A-Tech
A-Tech 4GB DDR3L 1333MHz PC3L-10600 240-Pin Desktop RAM
A 4GB DDR3L desktop memory module running at 1333MHz with a low 1.35V voltage and 240-pin DIMM form factor
- Capacity4GB
- SpeedDDR3L 1333 (PC3L 10600)
- Tested Frequency1333
- Voltage1.35V
- ECCNo
- Buffered/RegisteredUnbuffered
- Boosts multitasking with 4GB DDR3L 1333MHz capacity
- Low 1.35V DDR3L voltage cuts power draw
- 240-pin DIMM fits standard desktop slots
- Non-ECC unbuffered design ensures broad compatibility
- Tested replacement for Micron MT16KTF51264AZ-1G4 modules
Designed for DDR3L desktop upgrades
This A-Tech module adds 4 GB of DDR3L memory running at 1333 MHz with a PC3L-10600 rating. It uses the 240-pin DIMM form factor and operates at 1.35 V as an unbuffered, non-ECC stick. The kit is built as a direct replacement for Micron part numbers MT16KTF51264AZ-1G4 and MT16KTF51264AZ-1G4M1.
Suits owners of compatible DDR3L desktops needing
Buyers whose systems require ECC or registered memory should look elsewhere, as this module provides neither. Anyone needing a higher capacity per slot or a different voltage specification will also need another product.
Voltage is 1.35 V DDR3L low-voltage standard
This single figure determines whether the module matches the motherboard's memory voltage requirement; verify your platform supports DDR3L at this level before purchasing.
Öne çıkanlar
- Boosts multitasking with 4GB DDR3L 1333MHz capacity
- Low 1.35V DDR3L voltage cuts power draw
- 240-pin DIMM fits standard desktop slots
- Non-ECC unbuffered design ensures broad compatibility
- Tested replacement for Micron MT16KTF51264AZ-1G4 modules
Teknik özellikler
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| Tested Frequency | 1333 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Bu ürünle ilgili sorular
Does my motherboard need a 240-pin DDR3 slot to install this module?
Yes, this is a 240-pin DIMM built for desktop boards that accept DDR3 memory.
Will this 1.35V DDR3L stick run reliably in a system that currently uses 1.5V DDR3 modules?
DDR3L is backward compatible with 1.5V slots; the module will operate at the higher voltage when mixed with standard DDR3.
How can I confirm the RAM is running at the rated 1333MHz after installation?
Check the memory frequency in BIOS or a system utility such as CPU-Z; it should report 1333 MT/s for this PC3L-10600 module.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
