A-Tech
A-Tech 4GB DDR3L 1866MHz CL13 1.35V SODIMM laptop RAM
4GB DDR3L SODIMM runs at 1866MHz with CL13 latency and 1.35V low voltage for laptop upgrades
- Capacity4GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1866 (PC3L 14900)
- CAS LatencyCL13
- Voltage1.35V
- ECCNo
- Boosts system responsiveness with 4GB DDR3L 1866MHz CL13 module
- Low 1.35V DDR3L voltage reduces power draw and heat
- 204-pin SO-DIMM form factor fits standard laptop memory slots
- Non-ECC unbuffered design ensures broad compatibility with consumer notebooks
- Direct replacement for Micron MT8KTF51264HZ-1G9E1 and MT8KTF51264HZ-1G9E5
Compatible 4GB DDR3L SODIMM Upgrade
This module replaces Micron MT8KTF51264HZ-1G9E1 and MT8KTF51264HZ-1G9E5 parts in laptops, notebooks and all-in-one systems. It delivers 4GB of DDR3L 1866MHz memory with CL13 latency for owners needing a direct, tested replacement. Buyers who require higher capacities or dual-channel kits should look elsewhere.
Low-Voltage 1.35V Operation
The DDR3L specification runs at 1.35V, reducing power draw and heat compared with standard DDR3 1.5V modules. Unbuffered, non-ECC design keeps the electrical load light on the memory controller during typical workloads. No heat spreader is fitted, so airflow in the chassis handles cooling silently.
Lifetime Warranty and US-Based Support
Every unit undergoes quality assurance testing before shipping to confirm reliable operation at the rated PC3L 14900 speed. A lifetime warranty covers the module for as long as you own it, and complimentary United States technical support is available before, during and after installation. No additional software or accessories are bundled.
Öne çıkanlar
- Boosts system responsiveness with 4GB DDR3L 1866MHz CL13 module
- Low 1.35V DDR3L voltage reduces power draw and heat
- 204-pin SO-DIMM form factor fits standard laptop memory slots
- Non-ECC unbuffered design ensures broad compatibility with consumer notebooks
- Direct replacement for Micron MT8KTF51264HZ-1G9E1 and MT8KTF51264HZ-1G9E5
Teknik özellikler
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Micron |
| Model | MT8KTF51264HZ-1G9E1, MT8KTF51264HZ-1G9E5 |
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1866 (PC3L 14900) |
| CAS Latency | CL13 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | MT8KTF51264HZ-1G9E1, MT8KTF51264HZ-1G9E5 |
| Recommend Use | Compatible Replacement for Micron MT8KTF51264HZ-1G9E1, MT8KTF51264HZ-1G9E5 |
Bu ürünle ilgili sorular
How do I install this 204-pin DDR3L SODIMM and what step do people often miss?
Align the notch on the module with the slot key, insert at an angle, then press down firmly until both side clips click — many forget to verify both clips are fully latched.
What maintenance or replacement will this 4GB DDR3L 1866MHz CL13 module need later?
No scheduled maintenance is required; if errors appear, reseat the module or test with a memory diagnostic — replacement is only needed if the module fails.
What limit appears first on this 1.35V DDR3L SODIMM under sustained heavy workloads?
The 4GB capacity ceiling is reached before thermal or voltage limits, causing swapping and reduced responsiveness during prolonged multitasking.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.



