SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00505552BTC
Stokta
A-Tech
A-Tech 64GB DDR5 4800 ECC RDIMM 2Rx4 for Hynix HMCG94MEBQA 109N 121N 123N Server Memory
64 GB DDR5 4800 ECC RDIMM 2Rx4 server module with CL40 latency and 1.1 V operation
- Capacity64GB
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Voltage1.10V
- ECCYes
- Buffered/RegisteredRegistered
- 64 GB capacity supports heavy server workloads
- DDR5 4800 speed delivers high data throughput
- ECC RDIMM design detects and corrects memory errors
- 10 V operation matches DDR5 standard voltage
- 2Rx4 registered architecture scales across multi-channel platforms
64GB DDR5 4800 ECC RDIMM 2Rx4 Server Module
This A-Tech module delivers 64GB of DDR5 4800MHz registered ECC memory for server and workstation platforms. It operates at the standard 1.10V DDR5 voltage with CL40 latency. The dual-rank 2Rx4 organisation uses a major-brand chipset and a 288-pin DIMM form factor. It is built as a compatible replacement for specific Hynix part numbers.
Suited for DDR5 RDIMM Slots Only
This memory fits systems that require registered DDR5 DIMMs with ECC support and accept a 2Rx4 configuration. It will not work in boards that take only unbuffered UDIMMs, nor in slots keyed for earlier DDR generations. Builders needing a different capacity, rank layout, or voltage should verify their platform specifications before ordering.
288-Pin DDR5 DIMM Form Factor
The module uses the 288-pin DDR5 DIMM interface, which is the single physical specification that determines whether it installs in a given server or workstation. Confirm the motherboard manual lists DDR5 RDIMM support and the correct pin count before purchase.
Öne çıkanlar
- 64 GB capacity supports heavy server workloads
- DDR5 4800 speed delivers high data throughput
- ECC RDIMM design detects and corrects memory errors
- 10 V operation matches DDR5 standard voltage
- 2Rx4 registered architecture scales across multi-channel platforms
Teknik özellikler
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix |
| Model | HMCG94MEBQA, HMCG94MEBQA109N, HMCG94MEBQA121N, HMCG94MEBQA123N |
| Capacity | 64GB |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 (EC4) |
| Chipset | Major Brand Chipset |
| Features | HMCG94MEBQA, HMCG94MEBQA109N, HMCG94MEBQA121N, HMCG94MEBQA123N |
Bu ürünle ilgili sorular
Will the 64 GB DDR5 4800 ECC RDIMM need any firmware updates or periodic replacement in a server?
The module is a solid-state component with no moving parts and no firmware to update. Under normal server conditions it runs until a hardware fault occurs, at which point the single 64 GB stick is replaced.
What limit appears first when the Hynix-compatible 2Rx4 module runs at full load continuously?
The registered DDR5 4800 design operates at 1.10 V with CL40 latency. The first sustained-use boundary is the thermal envelope of the server chassis; the memory itself has no separate throttle point listed.
How much noise, heat or power does the 288-pin DDR5 4800 RDIMM add when the system runs all day?
The module draws power at the standard DDR5 1.10 V level and produces only the heat typical for a 64 GB registered DIMM. It adds no audible noise; cooling is handled by the server’s existing airflow.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
