ADATA
ADATA LEGEND 860 SLEG-860-500GCS 500GB internal SSD
- Internal Solid Stat…
- Consumer
$78,99
0.00101803BTC
Stokta
ADATA
ADATA SLEG-860-1000GCS 1TB PCIe 4.0 x4 M.2 2280 internal SSD
A 1 TB PCIe 4.0 x4 M.2 2280 NVMe 1.4 drive with DRAM cache, 7,400 MB/s read and 6,800 MB/s write, plus an included heatsink
- Max Sequential ReadUp to 7400 MBps
- Max Sequential WriteUp to 6800 MBps
- 4KB Random Read730K
- 4KB Random Write610K
- Terabytes Written (TBW)780TB
- MTBF2,000,000 hours
Capacity 1TB
- 1TB
- 500GB
- Sequential reads reach 7400 MB/s for faster boot and load times
- Sequential writes hit 6800 MB/s to accelerate large file transfers
- DRAM cache and 3D NAND sustain performance under heavy workloads
- 780 TBW and 2,000,000-hour MTBF indicate long service life
- Bundled heatsink helps maintain speeds during extended use
Capacity and interface
The ADATA Legend 860 1TB drive uses a PCIe 4.0 x4 interface in the M.2 2280 form factor. It is built for desktop PCs and the PlayStation 5 console. The NVMe 1.4 protocol and DRAM cache support responsive system operation.
Sustained workload behaviour
Sequential throughput reaches up to 7400 MBps read and 6800 MBps write. Random performance is rated at 730K read and 610K write IOPS. The 780 TBW endurance rating and 2000000 hour MTBF indicate durability for heavy daily write cycles.
Build and installation practicality
A heatsink is included in the package but ships uninstalled, letting the builder choose whether to fit it. The drive operates from 0°C to 70°C and survives storage from -40°C to 85°C. Shock resistance is rated at 1500G for physical resilience.
Öne çıkanlar
- Sequential reads reach 7400 MB/s for faster boot and load times
- Sequential writes hit 6800 MB/s to accelerate large file transfers
- DRAM cache and 3D NAND sustain performance under heavy workloads
- 780 TBW and 2,000,000-hour MTBF indicate long service life
- Bundled heatsink helps maintain speeds during extended use
Teknik özellikler
| Max Sequential Read | Up to 7400 MBps |
|---|---|
| Max Sequential Write | Up to 6800 MBps |
| 4KB Random Read | 730K |
| 4KB Random Write | 610K |
| Terabytes Written (TBW) | 780TB |
| MTBF | 2,000,000 hours |
| HeatSink | Comes with Heatsink in package uninstalled |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Interface | PCI-Express 4.0 x4 |
| Memory Components | 3D NAND |
| Protocol | NVMe 1.4 |
| Cache | DRAM |
| Max Shock Resistance | 1500G |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Brand | ADATA |
| Series | LEGEND 960 |
| Model | ALEG-960-1TCS |
| Part Number | ALEG-960-1TCS |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Features | * Ultra-fast PCIe Gen4 x4 interface * R/W speed up to 7,400/6,800MB/s * DRAM Cache * Work with PS5 * Advanced hardware LDPC ECC Technology |
| Kargo ağırlığı | 0.09 kg |
| Koli boyutu | 127 × 102 × 13 mm |
Bu modelin diğer sürümleri
Aynı seriden 1 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
Bu ürünle ilgili sorular
How warm does the LEGEND 860 1TB get under sustained PCIe 4.0 x4 loads with the included heatsink fitted?
The drive is rated for 0°C to 70°C operating temperature. The bundled heatsink is designed to keep the controller and 3D NAND within that range during continuous 7400 MBps reads or 6800 MBps writes, and the 2000000-hour MTBF reflects this thermal envelope.
Does my motherboard need a PCIe 4.0 x4 M.2 slot and NVMe 1.4 support to run this ADATA 1TB drive at full speed?
Yes. The SSD uses a PCIe 4.0 x4 interface and NVMe 1.4 protocol; a compatible M.2 2280 key-M slot is required to reach the quoted 7400 MBps read and 6800 MBps write figures.
Will the LEGEND 860 1TB work in a desktop that currently boots from a PCIe 3.0 NVMe drive?
The SSD is backward compatible with PCIe 3.0 x4 slots, so it will function alongside an older PCIe 3.0 boot drive, though sequential speeds will be limited to the 3.0 bus ceiling rather than the native 7400/6800 MBps.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
