ALTRONIX
ALTRONIX AL600ULXB Power Supply Board 115V AC 12/24V DC D587431
Desktop chassis power supply board converting 115 V AC to 12 V or 24 V DC
- Chassis TypeDesktop
- Dual 12 V-DC and 24 V-DC outputs power diverse server components
- 115 V-AC input connects directly to standard mains supply
- 600 model PCB board fits desktop chassis installations
- Integrated charger function maintains battery backup for uninterrupted operation
- New condition ensures reliable performance from first installation
ALTRONIX AL600ULXB Power Supply Board
The ALTRONIX AL600ULXB is a PCB circuit board that converts 115 V AC mains into regulated 12 V DC and 24 V DC outputs. It is designed for integrators and technicians who need a compact power source for access-control panels, CCTV equipment or similar low-voltage systems.
Installation and common issues
Mounting uses standard PCB standoffs and the screw terminals accept stripped wire without special tools. The main difficulty is verifying polarity before power-up because reversed DC leads can damage connected devices. Adequate ventilation around the board must be provided to prevent thermal shutdown under continuous load.
Capacity and headroom
Dual 12 V and 24 V rails supply the rated output for typical security and automation loads such as door strikes, readers and cameras. The board reaches its limit when the combined draw approaches the maximum rated current, at which point voltage sag or protection tripping will occur. It is not suited for high-power motor drives or multi-device racks that exceed the specified output capability.
Öne çıkanlar
- Dual 12 V-DC and 24 V-DC outputs power diverse server components
- 115 V-AC input connects directly to standard mains supply
- 600 model PCB board fits desktop chassis installations
- Integrated charger function maintains battery backup for uninterrupted operation
- New condition ensures reliable performance from first installation
Teknik özellikler
| Chassis Type | Desktop |
|---|
Bu ürünle ilgili sorular
How can I verify the ALTRONIX AL600ULXB board is delivering both 12 V-DC and 24 V-DC after installation?
Measure the output terminals with a multimeter set to DC volts; you should read approximately 12 V on the 12 V-DC rail and 24 V on the 24 V-DC rail when the 115 V-AC input is live.
What comes with the ALTRONIX AL600ULXB power supply board and what must be sourced separately?
The package contains the PCB circuit board only; you will need to provide a 115 V-AC mains connection, an enclosure or chassis, mounting hardware and any load-side wiring.
Which output voltage version of the ALTRONIX AL600ULXB should I select for my application?
This single board provides both 12 V-DC and 24 V-DC simultaneously, so no separate version choice is required — use the rail that matches your load.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
