Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
White aluminium GPU support bracket with adjustable screw height 2.8-4.7 inch and magnetic base

BFKK

BFKK GPU Support Bracket Adjustable 2.8-4.7" White

SKU CH-23TH-581RF

Adjustable aluminium bracket supports graphics cards from 2.8 to 4.7 inches with magnetic base and non-slip pad

  • ColorWhite
  • OptionNormal

Option Normal

  • All-aluminium construction resists ageing better than plastic
  • Adjustable 2.8-4.7" height fits varied chassis layouts
  • Hidden base magnet gives secure footing on steel cases
  • Three-stage CNC finish adds durability and a clean look
  • Prevents graphics-card sag to protect the PCIe slot

Purpose and Fit

This adjustable GPU support bracket is designed for PC builders who need to stop a heavy graphics card from sagging inside a standard chassis. The white aluminium finish suits clean or light-themed builds where visible metal hardware should match the colour scheme.

Height Range

The bracket extends from 2.8 inches to 4.7 inches by turning the central screw, so it bridges the gap between the graphics card back-plate and the case floor or PSU shroud. Measure that clearance in your build; if the distance falls outside this range the bracket cannot be used.

Installation Notes

A magnetic base holds the stand in place on the steel case floor while you raise the threaded shaft to meet the card. Tighten the middle locking nut once contact is made. The magnet only works on ferrous metal, so non-magnetic aluminium or plastic case floors will not hold the bracket.

Öne çıkanlar

  • All-aluminium construction resists ageing better than plastic
  • Adjustable 2.8-4.7" height fits varied chassis layouts
  • Hidden base magnet gives secure footing on steel cases
  • Three-stage CNC finish adds durability and a clean look
  • Prevents graphics-card sag to protect the PCIe slot

Teknik özellikler

ColorWhite
OptionNormal

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

How does the 2.8 to 4.7 inch adjustment range translate once the bracket is installed in my case?

The screw mechanism lets you set the exact height between 2.8 and 4.7 inches so the bracket contacts the graphics-card backplate and stops sag regardless of motherboard or PSU-shroud position.

What mounting method does the bracket use to stay in place?

A hidden magnet in the base anchors it to the steel chassis floor, while a non-slip sheet adds friction so the stand will not slide during transport or vibration.

How much clearance do I need above the graphics card for the bracket to fit?

You need at least 4.7 inches of vertical space from the chassis floor to the side panel or drive cage so the fully extended bracket can sit under the card without interference.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.