Black Diamond Memory
Black Diamond Memory BDSSDS512G 2.5" 512GB SATA enterprise SSD
- 2.5"
- 512GB
$152,99
0.00196891BTC
Stokta
Black Diamond Memory
Black Diamond Memory BDSSDS1T 1TB 2.5" SATA enterprise SSD
A 2.5-inch 1 TB SATA enterprise SSD with 520 MB/s read and 460 MB/s write speeds and a 2,000,000-hour MTBF
- Form Factor2.5"
- Capacity1TB
- Memory ComponentsTLC
- InterfaceSATA III
- ControllerMarvell 88SS9187
- Max Sequential ReadUp to 520 MBps
- Up to 520 MB/s sequential read for fast data access
- Up to 460 MB/s sequential write for quick file saves
- 2 million hours MTBF for long-term reliability
- Power-loss protection guards data during unexpected shutdowns
- 5-inch SATA form factor fits standard drive bays
Enterprise SSD for SATA arrays
The Black Diamond Memory Sonic Series BDSSDS1T is a 1 TB 2.5 inch SATA III solid-state drive built with TLC NAND and a Marvell 88SS9187 controller. It targets server and storage-array builders who need reliable capacity on the legacy SATA bus. The 7 mm height fits standard drive bays and hot-swap trays.
SATA III throughput ceiling
The drive connects through the SATA III 6 Gbps interface, so sequential reads top out at 520 MBps and writes at 460 MBps. Random I/O and sustained writes will sit well below those peaks. Builders planning all-flash arrays must budget for the interface bottleneck rather than the NAND potential.
TLC endurance for mixed workloads
TLC flash trades write endurance for cost, making this model suited to read-heavy or mixed workloads rather than write-intensive logging or caching tiers. The 2 million hour MTBF rating supports always-on operation, but lifetime writes are limited by the memory technology. Choose a different drive class for heavy write duty.
Öne çıkanlar
- Up to 520 MB/s sequential read for fast data access
- Up to 460 MB/s sequential write for quick file saves
- 2 million hours MTBF for long-term reliability
- Power-loss protection guards data during unexpected shutdowns
- 5-inch SATA form factor fits standard drive bays
Teknik özellikler
| Brand | Black Diamond Memory |
|---|---|
| Series | Sonic Series |
| Model | BDSSDS1T |
| Form Factor | 2.5" |
| Capacity | 1TB |
| Memory Components | TLC |
| Interface | SATA III |
| Controller | Marvell 88SS9187 |
| Max Sequential Read | Up to 520 MBps |
| Max Sequential Write | Up to 460 MBps |
| MTBF | 2,000,000 hours |
| Features | Faster: System boot up and application loading speeds up to about 4x faster than typical HDDs Reliable: Durable, with no moving parts leaving the SSD less likely to fail Security: Will react to sudden power loss, protecting valuable data from corruption before it turns off Economical: Optimized design allowing for a more affordable switch to SSD Multiple Capacities - For the more demanding workloads Silent: Runs without noise Resistance: Shock and vibration resistan |
| Operating Temperature | 0°C ~ +70°C |
| Height | 7.00mm |
| Width | 69.86mm |
| Depth | 100.50mm |
| Kargo ağırlığı | 0.14 kg |
| Koli boyutu | 100 × 70 × 7 mm |
Bu modelin diğer sürümleri
Aynı seriden 2 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
Black Diamond Memory
Black Diamond Memory BDSSDS256G 2.5" 256GB SATA enterprise SSD
- 2.5"
- 256GB
$163,99
0.00211047BTC
StoktaBu ürünle ilgili sorular
Should I pick the 256 GB, 512 GB or 1 TB Sonic Series SSD?
The 1 TB model BDSSDS1T gives the most space for OS, applications and data on a single 2.5 inch SATA drive.
What does the 520 MBps sequential read mean for everyday server use?
It lets the Marvell 88SS9187 controller serve large files and boot images at near SATA III line speed, cutting load times versus mechanical drives.
Does the SATA III 6 Gbps interface limit the 460 MBps write rate in practice?
Yes, the SATA III ceiling caps sustained writes at the rated 460 MBps, so the drive cannot exceed that throughput regardless of workload.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
