SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00497696BTC
Stokta
Brute Networks
Brute Networks 8GB DDR4 2133MHz CL15 1Rx4 Registered RDIMM 1.2V
8GB DDR4-2133 registered ECC RDIMM with CL15 latency and 1.2V operation for HP-compatible servers
- Capacity8GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 8GB capacity supports larger server workloads
- DDR4 2133MHz speed handles demanding data rates
- CL15 latency provides responsive memory access
- ECC and registered design protects data integrity
- 2V operation reduces power consumption per module
8GB DDR4-2133 Registered ECC RDIMM
This 8GB DDR4 module runs at 2133MHz with CL15 latency and 1.20V operation. It uses a 288-pin registered design with ECC and a single 1Rx4 rank. The part matches HP specification 790109-001 for direct replacement in compatible servers.
Suited for HP servers needing registered ECC memory
This module fits systems that require registered DDR4 with ECC error correction at the PC4-17000 speed grade. It is not for desktops or workstations that only accept unbuffered non-ECC DIMMs. Buyers needing higher capacities or faster DDR4 speeds should look at other modules.
Verify registered ECC support and slot availability
Check that your server motherboard supports registered DDR4 ECC memory at 2133MHz before ordering. Confirm the system accepts 1Rx4 organisation and 1.20V voltage. Ensure a free 288-pin DIMM slot is available for the single module installation.
Öne çıkanlar
- 8GB capacity supports larger server workloads
- DDR4 2133MHz speed handles demanding data rates
- CL15 latency provides responsive memory access
- ECC and registered design protects data integrity
- 2V operation reduces power consumption per module
Teknik özellikler
| Brand | HP |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
Bu ürünle ilgili sorular
Does my server need 288-pin DDR4 slots and support registered ECC memory to use this module?
Yes, the 288-pin DDR4 RDIMM requires a motherboard with registered ECC DDR4 slots running at 1.2 V.
Can I add this CL15 2133 MHz stick to existing CL15 2133 MHz RDIMMs without timing conflicts?
Matching speed, CAS latency, voltage and registered design lets it run alongside identical modules at the same 2133 MHz CL15 settings.
How do I confirm the module is recognised as 8 GB 1Rx4 ECC registered at 2133 MHz after installation?
Check the BIOS memory information or OS tools such as dmidecode; they should show 8 GB, 1Rx4 organisation, ECC enabled and 2133 MHz speed.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
