Colorful
Colorful CN600PRO 1TB internal SSD with HeatSink
- Up to 3400 MBps
- Up to 3100 MBps
$115,99
0.00149719BTC
Stokta
Colorful
Colorful CN600PRO 512GB internal SSD with heatsink
512 GB NVMe SSD with a heatsink, PCIe 3.0 x4 interface, up to 3300 MB/s read and 2600 MB/s write, rated for 160 TBW
- Max Sequential ReadUp to 3300 MBps
- Max Sequential WriteUp to 2600 MBps
- Terabytes Written (TBW)160TBW
- HeatSinkwith HeatSink
- Form FactorM.2 2280
- Capacity512GB
Capacity 512G
- 1TB
- 512G
- Reads up to 3300 MBps cut boot and load times
- Writes up to 2600 MBps speed up large file transfers
- 160 TBW rating supports heavy daily workloads
- Integrated heatsink keeps temperatures steady under load
- M.2 2280 form factor fits most laptops and desktops
Colorful CN600PRO 512GB NVMe SSD
The Colorful CN600PRO is a 512GB internal solid-state drive built for consumer PCs and Mini PCs. It uses a PCI-Express 3.0 x4 interface with NVMe 1.4 protocol to deliver fast boot and application loading. An integrated heatsink helps maintain stable temperatures during sustained workloads.
Capacity and headroom
The 512GB capacity provides ample space for an operating system, core applications and a selection of games. Sequential reads reach 3300 MBps while writes reach 2600 MBps, so large file transfers complete quickly. The drive is rated for 160TBW, giving a clear endurance ceiling for heavy write scenarios.
Build integration
The M.2 2280 form factor fits standard slots in modern laptops, desktops and Mini PCs without adapters. 3D TLC NAND and a controller supporting NVMe 1.4 keep power draw low and latency consistent. The onboard heatsink handles thermal management directly on the drive, freeing the system from extra cooling requirements.
Öne çıkanlar
- Reads up to 3300 MBps cut boot and load times
- Writes up to 2600 MBps speed up large file transfers
- 160 TBW rating supports heavy daily workloads
- Integrated heatsink keeps temperatures steady under load
- M.2 2280 form factor fits most laptops and desktops
Teknik özellikler
| Max Sequential Read | Up to 3300 MBps |
|---|---|
| Max Sequential Write | Up to 2600 MBps |
| Terabytes Written (TBW) | 160TBW |
| HeatSink | with HeatSink |
| Form Factor | M.2 2280 |
| Capacity | 512GB |
| Interface | PCI-Express 3.0 x4 |
| Memory Components | 3D TLC |
| Protocol | NVMe 1.4 |
| Brand | Colorful |
| Series | CN600PRO |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Operating Temperature | 0°C ~ +70°C |
Bu modelin diğer sürümleri
Aynı seriden 1 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
Bu ürünle ilgili sorular
Will the PCIe 3.0 x4 interface on this CN600PRO work in a motherboard slot that only supports PCIe 2.0?
Yes, the drive is backward compatible and will operate at PCIe 2.0 speeds when installed in an older slot, though maximum sequential read of 3300 MBps requires a 3.0 x4 connection.
How can I verify the NVMe 1.4 drive is delivering the rated 3300 MBps read and 2600 MBps write after installation?
Run a benchmark tool such as CrystalDiskMark using the NVMe protocol test profile; sustained sequential results should approach the stated 3300 MBps read and 2600 MBps write figures.
Does the CN600PRO box include a mounting screw for the M.2 2280 slot, or must I source one separately?
The drive ships with the integrated heatsink already attached; a mounting screw is not included and must be supplied by the motherboard or laptop chassis.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
